Power Setting in Expert configuration

MMDVM_HS Hat hardware
Post Reply
K4ED
Posts: 9
Joined: Wed Sep 09, 2020 5:43 pm

Power Setting in Expert configuration

Post by K4ED »

I noticed there is a "power" setting on the MMDVM Expert configuration screen, just below the RX and TX frequency set.

I'm having a hard time finding out what units this is set in and what is the allowable range. On mine, it seems to be set at '1' .. and that seems, well, likely low.

Is this field documented anywhere? Is '1' an abnormally low value?
K4ED
Posts: 9
Joined: Wed Sep 09, 2020 5:43 pm

Re: Power Setting in Expert configuration

Post by K4ED »

Thanks a lot! When I looked at the [Modem] section, it is indeed set to 100.
Post Reply