New firmware for the MMDVM_HS_Hat has been released. You can upgrade by entering the following in "Expert", "SSH Access":
sudo pistar-mmdvmhshatflash hs_hat
I am running three Jumbo Spots. One of them upgraded fine the first time (running YSF). The other two had to have the upgrade ran on them a second time, then power cycled before they would function properly (one running YSF, one running DMR). Also I did not have to change the RXOffset after the upgrade for them to work.
Good luck!!
-Jeff, K9JTV
New Firmware v1.4.1 Released
Re: New Firmware v1.4.1 Released
Thanks, Jeff!
I did the same firmware update to 1.4.1 for the MMDVM_HS_Hat board by Mathis, DB9MAT, and Florian, DF2ET, with the onboard 12.288 MHz TCXO connected to GPIO:
1.4.1 apparently fixes some minor bugs in 1.4.0 that Florian reported to Andy, CA6JAU. Good stuff!
I did the same firmware update to 1.4.1 for the MMDVM_HS_Hat board by Mathis, DB9MAT, and Florian, DF2ET, with the onboard 12.288 MHz TCXO connected to GPIO:
as well as to two of my ZUMspots:sudo pistar-mmdvmhshatflash hs_hat-12mhz
All three updated flawlessly.sudo pistar-zumspotflash rpi
1.4.1 apparently fixes some minor bugs in 1.4.0 that Florian reported to Andy, CA6JAU. Good stuff!
73, Toshen, KE0FHS
Playing with Pi-Star (unofficial notes about setting up and using Pi-Star):
https://amateurradionotes.com/pi-star.htm
Playing with Pi-Star (unofficial notes about setting up and using Pi-Star):
https://amateurradionotes.com/pi-star.htm
Re: New Firmware v1.4.1 Released
1.4.3 is now released as well, it tidies up and improves some ring buffer size allocations and fixes some alternate LED settings.
--
Brian G8SEZ
Brian G8SEZ