forum.pistar.uk

New firmware for the MMDVM_HS_Hat has been released. You can upgrade by entering the following in "Expert", "SSH Access":

sudo pistar-mmdvmhshatflash hs_hat

I am running three Jumbo Spots. One of them upgraded fine the first time (running YSF). The other two had to have the upgrade ran on them a second time, then power cycled before they would function properly (one running YSF, one running DMR). Also I did not have to change the RXOffset after the upgrade for them to work.

Good luck!!

-Jeff, K9JTV

Thanks, Jeff!

I did the same firmware update to 1.4.1 for the MMDVM_HS_Hat board by Mathis, DB9MAT, and Florian, DF2ET, with the onboard 12.288 MHz TCXO connected to GPIO:

sudo pistar-mmdvmhshatflash hs_hat-12mhz

as well as to two of my ZUMspots:

sudo pistar-zumspotflash rpi

All three updated flawlessly.

1.4.1 apparently fixes some minor bugs in 1.4.0 that Florian reported to Andy, CA6JAU. Good stuff!

1.4.3 is now released as well, it tidies up and improves some ring buffer size allocations and fixes some alternate LED settings.