Firmware Update DB9HAT/DF2ET HAT

[G8IMN]

Hi All, just been trying to update the firmware on my Pi-ZeroW, using the command 'To flash MMDVM_HS Hat devices by DB9MAT & DF2ET please use pistar-mmdvmhshatfl
ash', but all I see is command not recognised, any ideas as to where i'm going wrong please

Dennis G8IMN

[MW0MWZ]

Dennis,

Make sure you are logging in over SSH to get to the command line of your Pi-Star, from there running

Code: Select all

sudo pistar-mmdvmhshatflash

Should give you some output that tells you what to do.

[G8IMN]

Thanks for the info Andy, have already tried what you suggested, but will give it another go.

Dennis G8IMN

[G8IMN]

Success, just tried updating and it finally worked, now on HS__HAT V1.3.3 , thanks once again for your help Andy.

Dennis G8IMN

[M0XZT]

Sorry for hijacking your post,

Just updated my mmdvm hs dual hat and now it not working at all. Unable to read firmware version after 6 attempts

Used sudo pistar-mmdvmhshatflash hs_dual_hat

Its the dual hat from DF2ET DB9MAT
Kinda stuck now


Edit *rolled back to previous firmware and all working ok

[MW0MWZ]

What modem is it that you have ?

[M0XZT]

All sorted, reported the issue on github. Andy CA6JAU quickly fixed the firmware

[MW0MWZ]

That explains why we jumped a few versions