DV-Mega Ras Pi 3 UHF vocal message " user blocked "

DV-Mega Single / Dual band Hat for the Raspberry Pi
Post Reply
kb5dmt
Posts: 1
Joined: Mon Apr 16, 2018 6:31 pm
Location: DIXIE DMR Radio Group

DV-Mega Ras Pi 3 UHF vocal message " user blocked "

Post by kb5dmt »

My DV-Mega has ver. 3.07 HW
Pi-Star has ver. 3.4.11 / Dashboard 20180523

I have used the DV-Mega wired and wireless and it goes into Verbal/Vocal " user blocked " very intermittently .

It doesnt seem to matter what TG I am on, or which BrandMeister Server I am using .

I have tried it on another Ras-Pi .
I have purchased a new SD Card and burned a new image to it, and it still goes into " user blocked " error .

I have XFINITY / COMCAST internet at 75mbs Down / 10mbs Up.


I am also running a PFSense Firewall

Has anyone else encountered the " user block " message?

Thanks,
Lee Holliday
[email protected]
ke6yjc
Posts: 3
Joined: Fri Jun 08, 2018 3:54 pm

Re: DV-Mega Ras Pi 3 UHF vocal message " user blocked "

Post by ke6yjc »

Lee,

Any luck finding a resolution? I just had this issue crop up on my unit. :/
M0GLJ

Re: DV-Mega Ras Pi 3 UHF vocal message " user blocked "

Post by M0GLJ »

That a BrandMeister issue and has nothing to do with Pi-Star. Pi-Star is just the gateway to the network
ve3elb
Posts: 2
Joined: Thu Apr 12, 2018 10:37 am

DV-Mega Ras Pi 3 UHF vocal message " user blocked "

Post by ve3elb »

Are you running more than one hotspot/repeater on the same Network. are you using static IP for the units. If you are then you should not assign ports to these IP address best to use DHCP

You will also need to upgrade the Firmware version on your DVMega and Pi Star OS. Keep them up to date.

DVMega Firmware: v3.19
Pi Star OS: v3.4.15
M6NXK
Posts: 1
Joined: Thu Jun 21, 2018 8:18 am

Re: DV-Mega Ras Pi 3 UHF vocal message " user blocked "

Post by M6NXK »

Good Afternoon

I have set up my MMDVM to transmit and receive on DMRr how ever I can only receive on D Star it will not activate hotspot as it does on the Shark Rf,
I am only running the same frequency as normal and have not done any changes to the Icom 51 e +2.
DB3DE
Posts: 2
Joined: Tue Jan 01, 2019 2:43 pm

Re: DV-Mega Ras Pi 3 UHF vocal message " user blocked "

Post by DB3DE »

Hi,

I had the same thing in the beginning. Have look into the Brandmeister Dashboard -> Selfcare
After I switched off AirSecurity / TOTP there it worked for me...

73, DB3DE
Post Reply