DVMEGA Dual Band Hat Deaf and Mute on High end of VHF

DV-Mega Single / Dual band Hat for the Raspberry Pi
Post Reply
KB5AKO
Posts: 4
Joined: Sat Jun 23, 2018 5:48 pm

DVMEGA Dual Band Hat Deaf and Mute on High end of VHF

Post by KB5AKO »

As the subject states, this hat is deaf and mute on the high end of the vhf 2 meter band. It works great on the low end. It works fine on the low end of 70 cm. However, I didn’t try the high end of uhf. Does anyone know the frequency range that this hat will transmit and receive at?


Victor, KB5AKO
M0GLJ

Re: DVMEGA Dual Band Hat Deaf and Mute on High end of VHF

Post by M0GLJ »

You will need to go back to the vendor as that sounds like a hardware issue and cannot be fix by software
KB5AKO
Posts: 4
Joined: Sat Jun 23, 2018 5:48 pm

Re: DVMEGA Dual Band Hat Deaf and Mute on High end of VHF

Post by KB5AKO »

My post was mostly intended to bring awareness to others that they can get vhf functionality by utilizing the lower end of the 2 meter band in lieu of the upper end of the 2 meter band. I’m fine with being limited to the low end. My query in my initial post was merely idle curiosity. 73, and I really am favorable to forums like this instead of Facebook. Great job!


Victor, KB5AKO
M0GLJ

Re: DVMEGA Dual Band Hat Deaf and Mute on High end of VHF

Post by M0GLJ »

Thats not a Pi-Star issue. Thats is something for the vendor/manufacturer

Pi-Star is the software and does not enter int issue with hardware that is a design fault
M0KSP
Posts: 6
Joined: Wed Apr 11, 2018 1:44 pm

Re: DVMEGA Dual Band Hat Deaf and Mute on High end of VHF

Post by M0KSP »

Dv-Mega FREQ Range!

2M = 144.00 / 146.00
70cm = 430.00 / 440.00
Post Reply