Overflow in RF queue

Help with NXDN issues
Post Reply
W4DBG
Posts: 7
Joined: Wed Apr 11, 2018 1:40 pm

Overflow in RF queue

Post by W4DBG » Sun Aug 30, 2020 12:12 pm

Has anyone experienced this error with NXDN? If so, what’s the fix? Basically my NXDN radio will transmit into the Jumbospot and it can be heard perfectly but when someone keys up I get the error below and my radio does nothing. The RX light on the radio does nothing. Just looking for a fix :)

You can see error here

https://drive.google.com/file/d/1tl2X8A ... p=drivesdk

G8SEZ
Posts: 215
Joined: Fri Apr 13, 2018 8:26 pm

Re: Overflow in RF queue

Post by G8SEZ » Sun Aug 30, 2020 8:48 pm

What firmware version do you have in the Jumbospot? And what version of Pi-Star?
--

Brian G8SEZ

W4DBG
Posts: 7
Joined: Wed Apr 11, 2018 1:40 pm

Re: Overflow in RF queue

Post by W4DBG » Sun Aug 30, 2020 9:59 pm

Firmware: 1.3.3
Pi-Star: 3.4.17 **

** I tried Pi-Star 4.1.2 also

KE7FNS
Posts: 939
Joined: Wed Apr 17, 2019 11:11 pm

Re: Overflow in RF queue

Post by KE7FNS » Sun Aug 30, 2020 10:29 pm

W4DBG wrote:
Sun Aug 30, 2020 9:59 pm
Firmware: 1.3.3
:shock:

Update the firmware.
If someones previous actions are any indication of their future actions, then I predict the deletion and removal of access will happen at any moment. 7-11-2020.

"07/13/20 This Website Has Been Taken Down" ... again :lol:

W4DBG
Posts: 7
Joined: Wed Apr 11, 2018 1:40 pm

Re: Overflow in RF queue

Post by W4DBG » Sun Aug 30, 2020 11:12 pm

I have tried that too, unless I have been following the wrong instructions? If you have some instructions I would gladly try them.

KE7FNS
Posts: 939
Joined: Wed Apr 17, 2019 11:11 pm

Re: Overflow in RF queue

Post by KE7FNS » Sun Aug 30, 2020 11:20 pm

W4DBG wrote:
Sun Aug 30, 2020 11:12 pm
I have tried that too, unless I have been following the wrong instructions? If you have some instructions I would gladly try them.
Were you able to successfully flash the firmware or did you get a "failed to init" error?

If you were able to flash the firmware, you NEED to update and upgrade your hotspot so it pulls in the latest files, then flash the modem.

Run update a few times, and run upgrade until it says you are on the latest version. That should get the latest firmware files and scripts to put you on 1.4.17.
If someones previous actions are any indication of their future actions, then I predict the deletion and removal of access will happen at any moment. 7-11-2020.

"07/13/20 This Website Has Been Taken Down" ... again :lol:

Post Reply