NXDN Reflector?

Help with NXDN issues
Post Reply
KC6NKK
Posts: 1
Joined: Wed Nov 07, 2018 3:23 am

NXDN Reflector?

Post by KC6NKK » Thu Nov 15, 2018 1:07 am

Hello All, I am very new to this digital radio world. I have a DX-Mini Duplex hotspot in operation with a Kenwood NX-210G radio working great so far.
How would I go about connecting to my friends DMR repeater? I have seen talkgroups on NXDN that are linked to DMR talkgroups. Is this something that I can attempt as well?

Thanks,
Lloyd
KC6NKK

AF6VN
Posts: 76
Joined: Fri Jul 20, 2018 1:15 am

Re: NXDN Reflector?

Post by AF6VN » Fri Nov 16, 2018 7:27 pm

Based upon the dashboard, the software supports using a DMR radio to cross-link to NXDN systems. It does not have a NXDN link to DMR.

The available links are (local radio to network system):
  • DMR to NXDN
  • DMR to YSF
  • YSF to DMR
  • YSF to P25
  • YSF to NXDN
{And nobody want to talk to D-Star :lol: }

--
AF6VN
Dennis L Bieber

KA9UCE
Posts: 4
Joined: Sat Dec 15, 2018 2:38 am

Re: NXDN Reflector?

Post by KA9UCE » Sat Dec 15, 2018 3:54 pm

Hello!
I just got my feet wet, with a ZUM spot, and trying to get the NXDN settings to operate.
WiFi is running, I am supposedly active on TG65000, RAN 9, but I hear nothing, no access to anything.
This is how i am configured, please ignore the DMR portion though...NOT configured.
Pi-Star:3.4.13 / Dashboard: 20181214
Pi-Star Digital Voice Dashboard for KA9UCE
Dashboard | Admin | Configuration

Modes Enabled
D-Star DMR
YSF P25
YSF XMode NXDN
DMR XMode POCSAG

Network Status
D-Star Net DMR Net
YSF Net P25 Net
YSF2DMR NXDN Net
YSF2NXDN YSF2P25
DMR2NXDN DMR2YSF

Radio Info
Trx
Tx 449.700000 MHz
Rx 449.700000 MHz

DMR Repeater
DMR ID 3104392
DMR CC 1
TS1 disabled
TS2 enabled
No TG/No Ref
DMR Master
BM United States ..

YSF Network
Linked to: FCS00290

NXDN Radio
RAN 9
NXDN Network
Linked to: TG65000
Gateway Activity
Time (MST) Mode Callsign Target Src Dur(s) Loss BER

Local RF Activity
Time (MST) Mode Callsign Target Src Dur(s) BER RSSI
Pi-Star / Pi-Star Dashboard, © Andy Taylor (MW0MWZ) 2014-2018.
ircDDBGateway Dashboard by Hans-J. Barthen (DL5DI),
MMDVMDash developed by Kim Huebel (DG9VH),
Need help? Click here for the Facebook Group
or Click here to join the Support Forum
Get your copy of Pi-Star from here.

Why am I unable to access, or hear anything on NXDN?
I can't see a PTT response if I try accessing, and I am deaf as well.

I must be doing something wrong, downloading my log shows I can not access, and I have performed a few updates as well, still NO JOY!

Thanks in advance for any help...I really would love to see das blinken lights and hear voices..
ERNEST ERICKSON, KA9UCE
APPLIED ELECTRONIC COMMUNICATIONS
462.600/467.600, D432
444.700/449.700, D462
449.700 NXDN, RAN 9 ZUM PI-STAR(TEST)
[email protected]
602.290.6024

KA9UCE
Posts: 4
Joined: Sat Dec 15, 2018 2:38 am

Re: NXDN Reflector?

Post by KA9UCE » Sat Dec 15, 2018 8:50 pm

Hello again...

Here is the last line of my log file.
It states the device can not be opened...why?
E: 2018-12-15 20:44:00.453 Cannot open device - /dev/ttyACM0

What do I need to change/add or modify to eliminate this problem?
I show up on the NXDN reflector, but I believe that simply shows stations that are logged in, not active.
ERNEST ERICKSON, KA9UCE
APPLIED ELECTRONIC COMMUNICATIONS
462.600/467.600, D432
444.700/449.700, D462
449.700 NXDN, RAN 9 ZUM PI-STAR(TEST)
[email protected]
602.290.6024

AF6VN
Posts: 76
Joined: Fri Jul 20, 2018 1:15 am

Re: NXDN Reflector?

Post by AF6VN » Sun Dec 16, 2018 7:54 pm

As a wild guess -- you have the wrong "Modem" type selected on the configuration page. On my system (Rpi-3b with DV-Mega) I do NOT have a ttyACM0; I have a ttyAMA0. Alternately, you may have specified a display that is not connected (my configuration page shows [None][ttyAMA0] for display options.


FYI: cut&pasting the status page isn't really useful. The status page relies upon color coding boxes for up/down/unselected, and the color coding does not come through in text.

--
AF6VN
Dennis L Bieber

Post Reply