DMR2NXDN - Pi-Star:4.1.0-RC2

Help with NXDN issues
Post Reply
vk4uq
Posts: 3
Joined: Sun Nov 04, 2018 12:13 am

DMR2NXDN - Pi-Star:4.1.0-RC2

Post by vk4uq »

Hi all,

I am having a little difficulties in getting my Pi Star to create the connection between DMR to NXDN.

I have set the TGs up in the radio beginning with a "7" (eg 7065000 for WW). When I PTT on the radio, it is showing as "RX DMR" and then listening DMR.

I just wanted to check this is correct or is there something not right in the config before I search deeper? I have gone over everything a few times - maybe missing a specific setting somewhere. I just wanted to check if others have had DMR2NXDN up and running on 4.1.0-RC2??

Thoughts?
vk4uq
Posts: 3
Joined: Sun Nov 04, 2018 12:13 am

Re: DMR2NXDN - Pi-Star:4.1.0-RC2

Post by vk4uq »

Anyone?
User avatar
AA1PR
Posts: 12
Joined: Thu Jun 25, 2020 5:00 am

Re: DMR2NXDN - Pi-Star:4.1.0-RC2

Post by AA1PR »

Sir,
Im having the same issue
however not sure if we have the same firmware I have Pi-Star_RPi_V4.1.2_20-May-2020

here are some screen shots

I have my talkgroups for nxdn as 7 digits as found on 1 website
talkgroup.png
talkgroup.png (7.18 KiB) Viewed 7256 times
I have dmr2nxdn enabled
talkgroup.png
talkgroup.png (7.18 KiB) Viewed 7256 times
talkgroup.png
talkgroup.png (7.18 KiB) Viewed 7256 times
Changed stock dmr config to gateway as directed
Attachments
nxdn on.png
nxdn on.png (19.49 KiB) Viewed 7256 times
modes enabl;ed.png
modes enabl;ed.png (3.89 KiB) Viewed 7256 times
Last edited by AA1PR on Mon Dec 28, 2020 9:57 pm, edited 1 time in total.
User avatar
AA1PR
Posts: 12
Joined: Thu Jun 25, 2020 5:00 am

Re: DMR2NXDN - Pi-Star:4.1.0-RC2

Post by AA1PR »

seems 3 photos per post..OK

I updated the software via the dashboard just to make sure something wasnt missing etc...

pi-str seems to be accepting the channel aka talkgroup as I key into the pi-star
pistar page.png
pistar page.png (6.92 KiB) Viewed 7256 times
however I hear no return audio, data or anything else

not sure where to go from here

seems the few vidoes I watched were on older version of the firmware

I have the latest greatest installed fyi

any help is greatly appreciated, thanks
User avatar
AA1PR
Posts: 12
Joined: Thu Jun 25, 2020 5:00 am

Re: DMR2NXDN - Pi-Star:4.1.0-RC2

Post by AA1PR »

Ok Im not sure of this is 100% true but seems logical

a ham from seattle who also has a duplex hotspot is having the same issues

he claims its the clock speed of the 2 radios that arent synced that cause the problem

so it seems to crossmode on should place the hotspot in simplex mode

anyone know anything contrary to this?
Post Reply