forum.pistar.uk

Hi all,

I am having a little difficulties in getting my Pi Star to create the connection between DMR to NXDN.

I have set the TGs up in the radio beginning with a "7" (eg 7065000 for WW). When I PTT on the radio, it is showing as "RX DMR" and then listening DMR.

I just wanted to check this is correct or is there something not right in the config before I search deeper? I have gone over everything a few times - maybe missing a specific setting somewhere. I just wanted to check if others have had DMR2NXDN up and running on 4.1.0-RC2??

Thoughts?

Anyone?

Sir,
Im having the same issue
however not sure if we have the same firmware I have Pi-Star_RPi_V4.1.2_20-May-2020

here are some screen shots

I have my talkgroups for nxdn as 7 digits as found on 1 website I have dmr2nxdn enabled Changed stock dmr config to gateway as directed

seems 3 photos per post..OK

I updated the software via the dashboard just to make sure something wasnt missing etc...

pi-str seems to be accepting the channel aka talkgroup as I key into the pi-star however I hear no return audio, data or anything else

not sure where to go from here

seems the few vidoes I watched were on older version of the firmware

I have the latest greatest installed fyi

any help is greatly appreciated, thanks

Ok Im not sure of this is 100% true but seems logical

a ham from seattle who also has a duplex hotspot is having the same issues

he claims its the clock speed of the 2 radios that arent synced that cause the problem

so it seems to crossmode on should place the hotspot in simplex mode

anyone know anything contrary to this?