Arduino Due MMDVM code install and config.h setu

Help with other MMDVM Repeater Boards (with NO onboard RF)
Post Reply
g7kbr
Posts: 49
Joined: Thu Nov 01, 2018 1:03 pm

Arduino Due MMDVM code install and config.h setu

Post by g7kbr »

Hi all

I have an Arduino Due with a MMDVM V6.2 SP8NTH board and I just want to load d-star and DMR onto it, I believe their is MMDVM code where you can load only these modes. As the main branch is not suitable for the Due. Can anyone confirm which branch I need to load and the setting for the config.h file.

Regards


Paul
KE7FNS
Posts: 1719
Joined: Wed Apr 17, 2019 11:11 pm

Re: Arduino Due MMDVM code install and config.h setu

Post by KE7FNS »

g7kbr wrote: Mon Apr 12, 2021 4:40 pm Can anyone confirm which branch I need to load and the setting for the config.h file.
That isn't a very good idea, you are just going wind up with issues because you won't have any of the fixes/patches that have been added since then.

You are just better off tossing what you have on a shelf and buying new hardware. Just make sure what you buy is a MMDVM board that has a 180 MHz ARM M4 or faster on it. G4KLX suggests boards by KI6ZUM, N3XCC (Repeater Builder), BI7JTA, and DF2ET.
If someones previous actions are any indication of their future actions, then I predict the deletion and removal of access will happen at any moment. 7-11-2020.

"07/13/20 This Website Has Been Taken Down" ... again :lol:
Post Reply