Original ZUM 1.0 + DUE -any way to verify operation?

Help with other MMDVM Repeater Boards (with NO onboard RF)
G0OFY
Posts: 6
Joined: Wed Apr 11, 2018 10:20 pm
Location: Crossens, Southport.

Re: Original ZUM 1.0 + DUE -any way to verify operation?

Post by G0OFY » Mon Apr 08, 2019 6:47 pm

Also having a problem with zum radio v1.0 and Due. It appears that the boards all talk to each other. LEDs flash on the ZUM if pi star settings are changed. It doesn't seem to respond to the tx rx radios (GM350's). I assumed that platform.txt needed to be altered as the build.txt suggests. Has anyone got screenshots of pi star configuration settings of there setup? Pulling out what little hair I have left.
Eddy.

G0OFY
Posts: 6
Joined: Wed Apr 11, 2018 10:20 pm
Location: Crossens, Southport.

Re: Original ZUM 1.0 + DUE -any way to verify operation?

Post by G0OFY » Wed Apr 17, 2019 9:44 pm

Does anyone have a diagram for the ZUM radio v1.0 or point me in the right direction?

Post Reply