MMDVM Board - XD3804300

Help with other MMDVM Repeater Boards (with NO onboard RF)
Posts: 2
Joined: Fri Mar 13, 2020 2:35 am

Re: MMDVM Board - XD3804300

Post by ve3fdw »

G0FHM wrote: Mon Oct 28, 2019 10:41 am Hi folks,

I'm getting all the kit together for building a DMR repeater.

I have the above mentioned board (see attached photo).

I have a Pi 3B+ running 4.1.0-RC6.

When I connect the board to the Pi, the LEDs' on the board cycle, the red PWR LED is on, and the green LED flashes. However, the Pi won't boot - There is just the solid re LED, and no green ACT LED.

Am I doing something wrong? Or have I got a duff board?



Oh and PS - Can somebody tell me what the IGN connector does? I want to think ignition.....
Had this issue with my board as well. There was a post online that is seen where the pin that is in the sqare that you have circled shorts out the network connection with makes the pi board do a stop function. if you remove this pin from the connector i have mine bent out of the board connector it will work as intended.
Post Reply