MMDVM RPT HAT Firmware

Help with other MMDVM Repeater Boards (with NO onboard RF)
Post Reply
OE9CBV
Posts: 4
Joined: Sat Oct 13, 2018 1:09 pm

MMDVM RPT HAT Firmware

Post by OE9CBV »

Hi,

Im using the RPT HAT from Flo DF2FT
My firmware is the "20180723"
Now i would like to make the board ready for DAPNET. So i need to switch the TX Frequenz automatically of the GM360.
Is there a new firmware with the support for this?
On the board there is a pin called CHSW. (Channel Switch)??

regards Chris
M1DNS
Pi-Star Team
Posts: 1388
Joined: Thu Apr 05, 2018 5:30 am

Re: MMDVM RPT HAT Firmware

Post by M1DNS »

Afaia you'll need to recompile the MMDVM host software and replace the vers. that's currently in situ and then manually configure the .ini for it's use.

I don't believe it's added with the default pistar install.

You'll then obvs. Have to enable the alt. freq.(channel) setting in the gm360 setup.

Sent from my SM-G935F using Tapatalk

Andrew M1DNS.
Pi-star Admin Team.
Post Reply