Hi All
I have been playing with my zum radio and so far pretty happy with it, I have one small issue with YSF on VHF
if i press the wires x button on one of my radios, i see the pi-star rx and it then tx the connect, but I cant decode the the transmission, on the ft70 I see the coloured leds come on, but no connection, I have been through the trimmer pot tx range from end to end and tried different settings in pi-star ysf tx level and the low ysf deviation, the only difference is either the radio doesnt go into tx, or its seen as FM or not decoded, the FT70 LEDs show the correct colours as if its connected.. if I move to UHF on same radio after some inital basic trimmer pot adjustment all is well.
and all works on a different 2m/70cm rig, So yes its something this radio doesnt like but I am stuck with it for the moment, also it works fine tx/rx on d-star vhf/uhf, and a bit hit and miss on dmr...
any suggestions of other settings/places to look, I am not sure if its tx level too high or low? or something else
thanks
Cliff
Zum-Radio and YSF
Help with other MMDVM Repeater Boards (with NO onboard RF)
Return to “Other MMDVM Modem Boards”
Jump to
- Pi-Star Information
- ↳ Announcements
- ↳ Feature Requests
- ↳ FAQ
- Software Support
- ↳ Pi-Star General Support
- ↳ WiFi Setup
- ↳ IP Networking
- ↳ D-Star Specific Support
- ↳ DMR Specific Support
- ↳ YSF Specific Support
- ↳ P25 Specific Support
- ↳ NXDN Specific Support
- ↳ POCSAG Specific Support
- Hardware Support
- ↳ Raspberry Pi Foundation Hardware
- ↳ Friendly Arm Nano Pi Neo / Neo Air
- ↳ Hardkernel Odroid XU3 / XU4
- ↳ Orange Pi Zero
- ↳ Nextion Screens
- ↳ OLED Screens
- ↳ ZUMSpot (Hat / Libre / USB)
- ↳ MMDVM_HS Hat(s)
- ↳ DV-Mega Hat(s)
- ↳ DV-Mega GMSK Arduino
- ↳ DVAP Dongle
- ↳ DVR-PTR V1 V2 V3
- ↳ Other MMDVM Modem Boards
- ↳ Other All-in-one Boards with included RF
- ↳ Radio Equipment
- Repeater Keepers
- ↳ Software Support
- ↳ Hardware Support
- ↳ Everything Else
- Tutorials
- ↳ W1MSG Video Tutorials
- ↳ User Submitted Video Tutorials
- ↳ Tips and Tricks
- General Conversation
- ↳ Share your stuff
- ↳ I'm new here
- ↳ CQ CQ CQ
- ↳ I need to vent
- ↳ The Bar