Modem usb stm32f446 RN6LJT FM

Help with other MMDVM Repeater Boards (with NO onboard RF)
Post Reply
RN6LJT
Posts: 2
Joined: Sun Jun 27, 2021 1:28 pm

Modem usb stm32f446 RN6LJT FM

Post by RN6LJT »

hello
, the new firmware does not see the board Pi-stasr (USB stm32f446 rn6LjT, UARTPort=/dev/ttyUSB0
UARTSpeed=460800)

on pure MMDVM, define : MMDVM protocol version: 2, Description: MMDVM 20211220 19.2000 MHz Get ID #f898390
Processor: ST-Micro ARM, UDID: 16003A000151303532333238
Modes: D-Star DMR YZF P25 NXDN M17 FM POCSAG AX.25

Please add features for FM!

[FM]
Enable=1
# Callsign=RN6LJT
CallsignSpeed=20
CallsignFrequency=1000
CallsignTime=10
CallsignHoldoff=0
CallsignHighLevel=50
CallsignLowLevel=20
CallsignAtStart=1
CallsignAtEnd=1
CallsignAtLatch=0
RFAck=K
ExtAck=N
AckSpeed=20
AckFrequency=1750
AckMinTime=4
AckDelay=1000
AckLevel=50
# Timeout=180
TimeoutLevel=80
CTCSSFrequency=88.5
CTCSSThreshold=50
CTCSSHighThreshold=50
CTCSSLowThreshold=20
CTCSSLevel=20
KerchunkTime=0
HangTime=7
# AccessMode values are:
# 0 - Carrier access with COS
# 1 - CTCSS only access without COS
# 2 - CTCSS only access with COS
# 3 - CTCSS only access with COS to start, then carrier access with COS
AccessMode=0
# LinkMode=1 to remove almost all of the logic control
LinkMode=0
COSInvert=0
NoiseSquelch=0
SquelchThreshold=50
# SquelchHighThreshold=95
# SquelchLowThreshold=80
RFAudioBoost=1
MaxDevLevel=50
ExtAudioBoost=1
# ModeHang=10


[FM Network]
Enable=1
# Protocol=USRP
LocalAddress=127.0.0.1
LocalPort=3810
GatewayAddress=127.0.0.1
GatewayPort=4810
PreEmphasis=1
DeEmphasis=1
TXAudioGain=1.0
RXAudioGain=1.0
# ModeHang=3
Debug=0
Post Reply