APRS and IC-92AD

Help with D-Star related issues
G8OGJ
Posts: 16
Joined: Mon May 06, 2019 8:13 pm
Location: Matlock
Contact:

Re: APRS and IC-92AD

Post by G8OGJ » Fri May 10, 2019 10:11 am

I have flashed a new SD-card with 4.0.0-RC3 but there is still no entry for an APRS passcode - and yes, I have checked all of the 'Expert' settings too - as far as I can see.

On both versions, there IS a 'password' entry under the D-Star panel (Admin pane) but I had thought that this was for the ircddbgateway which I don't need as I am not a public access point.

Any thoughts?

Separately I cannot update or upgrade from 4.0.0-RC3 - post entered on a different section of the forum.

Ian
Amateur Radio Station G8OGJ

G8OGJ
Posts: 16
Joined: Mon May 06, 2019 8:13 pm
Location: Matlock
Contact:

Re: APRS and IC-92AD

Post by G8OGJ » Mon May 13, 2019 1:54 pm

Having upgraded to 4.0.0-RC4 there is an APRS passcode setting in the YSF expert panel and it was pre-populated with the passcode that I had obtained last week (so I presume that it is calculated in some way or the software looked it up automatically.

I will check later to see whether the D/APRS is working now.

Ian
Amateur Radio Station G8OGJ

Post Reply