Pi-Star does not show being connected to reflector

Help with D-Star related issues
K7RNS
Posts: 4
Joined: Fri May 03, 2019 2:11 am

Pi-Star does not show being connected to reflector

Post by K7RNS » Fri May 03, 2019 8:17 pm

I have a Zumspot and 2 Icom D-Star radios. The ID-51A and ID-5100. With either radio i can connect to the echo reflector and get audio back.
But when I try to connect to a reflector it goes thru the process but the Pi-Star dashboard does not show it connected. I have done factory resets, doesn't change.

M1DNS
Posts: 410
Joined: Thu Apr 05, 2018 5:30 am

Re: Pi-Star does not show being connected to reflector

Post by M1DNS » Fri May 03, 2019 8:42 pm

Any particular reflectors DCS, REF, XRF, XLX
If it's DPlus REF, Is ur callsign registered for use on the reflector?


Look at the live logs page when you make a connection.
More info is needed to be of any real help. The more you can tell us the easier and quicker it will be to find a resolution.

Andrew M1DNS, (Mod)

Andrew M1DNS.
Pi-star Admin Team.

K7RNS
Posts: 4
Joined: Fri May 03, 2019 2:11 am

Re: Pi-Star does not show being connected to reflector

Post by K7RNS » Fri May 03, 2019 10:56 pm

I am trying to connect to REF. Even when trying to connect from Pi-Star "request change" to a reflector it goes through the connect steps but does not show being connected in the D-star Network box. No audio is heard.

K7RNS
Posts: 4
Joined: Fri May 03, 2019 2:11 am

Re: Pi-Star does not show being connected to reflector

Post by K7RNS » Fri May 03, 2019 11:00 pm

Does not show on live logs page

K7RNS
Posts: 4
Joined: Fri May 03, 2019 2:11 am

Re: Pi-Star does not show being connected to reflector

Post by K7RNS » Fri May 03, 2019 11:37 pm

Newbie, apparently you can't connect to all reflectors. Am able to connect to some reflectors. What is the reason this happens?

M1DNS
Posts: 410
Joined: Thu Apr 05, 2018 5:30 am

Re: Pi-Star does not show being connected to reflector

Post by M1DNS » Sat May 04, 2019 7:43 am

K7RNS wrote:Does not show on live logs page
Each and every action should show something in the live logs, even if it's just showing a key up Image

Andrew M1DNS, (Mod)

Andrew M1DNS.
Pi-star Admin Team.

M1DNS
Posts: 410
Joined: Thu Apr 05, 2018 5:30 am

Re: Pi-Star does not show being connected to reflector

Post by M1DNS » Sat May 04, 2019 7:46 am

K7RNS wrote:Newbie, apparently you can't connect to all reflectors. Am able to connect to some reflectors. What is the reason this happens?
Not sure, I've been working with a few who have this same issue. Connecting DPlus REF is being problematic for several users currently.

As ur a newbie are you aware, or have you registered ur callsign for use on DPlus?

Andrew M1DNS, (Mod)

Andrew M1DNS.
Pi-star Admin Team.

G8OGJ
Posts: 27
Joined: Mon May 06, 2019 8:13 pm
Location: Matlock
Contact:

Re: Pi-Star does not show being connected to reflector

Post by G8OGJ » Wed Jun 05, 2019 4:52 am

My MMDVM Jumbospot exhibits this problem. It either never connects or connects and later drops connection to REF001c. Changing reflector doesn't seem to work whether from dashboard or from radio, although from the radio I get the audio "connecting to...". Then it connects of its own volition, perhaps 10 minutes after start-up, and all is well for a while before the connection is dropped again.

I am absolutely certain that this is not an internet connectivity problem. I have had this problem at two locations and there is no concurrent issue with the internet.

I upgraded to the latest release before posting this - so its not an old release issue.

Ian
Amateur Radio Station G8OGJ

User avatar
w7efs
Posts: 308
Joined: Sun Apr 22, 2018 4:26 pm

Re: Pi-Star does not show being connected to reflector

Post by w7efs » Thu Jun 06, 2019 6:09 pm

K7RNS wrote:
Fri May 03, 2019 8:17 pm
... But when I try to connect to a reflector it goes thru the process but the Pi-Star dashboard does not show it connected. ...
... because it isn't connected. You should check with the Yellowstone Radio Club where you registered, as it appears from the US Trust Server that your D-Star registration of 2012-05-17 is missing some necessary components such as the Postgres sync_mng and unsync_mng table records for your call sign.

ct1dvm
Posts: 163
Joined: Thu Apr 19, 2018 6:34 am

Re: Pi-Star does not show being connected to reflector

Post by ct1dvm » Sat Jun 08, 2019 8:53 am

K7RNS wrote:
Fri May 03, 2019 8:17 pm
I have a Zumspot and 2 Icom D-Star radios. The ID-51A and ID-5100. With either radio i can connect to the echo reflector and get audio back.
But when I try to connect to a reflector it goes thru the process but the Pi-Star dashboard does not show it connected. I have done factory resets, doesn't change.
Hi, You have no terminal on USTRUST, K7RN registered on K7EFA in 2012 had no terminals created, see ;

https://regist.dstargateway.org/instructions/ to complete the process or start again.

Also there is no echo reflector, the call to echo does not leave your hotspot, and is returned by ircddbgateway.

Post Reply