can't operate on Reflector 1C in crossmode.
can't operate on Reflector 1C in crossmode.
I hope you can help me....I have a Jumbospot and Retivis RT3S DMR radio....I have previously crossmode from DMR to YSF and chosen "YSF48375 XLX140" in the YSF configuration menu of my Pi-star software.....This has previously allowed me to operate on Reflector 1C but now after following the steps just outlined I cannot access Reflector 1C....Is it operational or am I doing something wrong in the configuration menu?...Any help would be most appreciated.
Re: can't operate on Reflector 1C in crossmode.
Don't see how you can cross mode to DStar as the codecs are different which means you need an AMBE encoder somewhere in the chain. PiStar doesn't have this.
--
Brian G8SEZ
Brian G8SEZ
Re: can't operate on Reflector 1C in crossmode.
I suspect this is in the wrong forum... OP specified a DMR radio and use of DMR<>YSF link...
--
AF6VN
Dennis L Bieber
Re: can't operate on Reflector 1C in crossmode.
REF001C is a DStar reflector.
I was confused by the mention of YSF but he seemed to want DMR -> DStar.
I was confused by the mention of YSF but he seemed to want DMR -> DStar.
--
Brian G8SEZ
Brian G8SEZ
Re: can't operate on Reflector 1C in crossmode.
http://xlx140.nix.pt/ Appears to be a node that bridges the modes, since the listing shows connections from D-STAR, YSF, and DMR radios. However, no idea regarding the 001C of the OP.
--
AF6VN
Dennis L Bieber
Re: can't operate on Reflector 1C in crossmode.
Possibly, I will admit that when I see XLX I must remember to think that it can do multi-protocol but I'm unsure about the re-encode step that is needed. I suppose if the server has an AMBE stick then it can.
--
Brian G8SEZ
Brian G8SEZ
Re: can't operate on Reflector 1C in crossmode.
I'm wondering if someone had cross-linked REF001C onto that XLX (or YSF #whatever) and the OP had been accessing that -- and likely the person who'd done the original cross-link of REF001C got banned (I'm pretty sure the traffic loads of REF001C and REF030C are such that the owners do not want them linked <G> )
--
AF6VN
Dennis L Bieber
Re: can't operate on Reflector 1C in crossmode.
Simple: Dont.
Dplus Admins have stated befor their busier main reflectors shouldn't be crosslinked to any other system. Just because the ability exists, doesn't mean you should do it.
Cross linking 1c, 30c will get you and your bridge an instant ban when found out.
Remember you are a guest on these networks, it isnt your right to cross link and do as you choose with someone else network.
Sent from my SM-G935F using Tapatalk
Dplus Admins have stated befor their busier main reflectors shouldn't be crosslinked to any other system. Just because the ability exists, doesn't mean you should do it.
Cross linking 1c, 30c will get you and your bridge an instant ban when found out.
Remember you are a guest on these networks, it isnt your right to cross link and do as you choose with someone else network.
Sent from my SM-G935F using Tapatalk
Andrew M1DNS.
Pi-star Admin Team.
Pi-star Admin Team.