How can I do factory\hardware reset for MMDVM?
... ATM, all I have is a solid green light and flashing red LED when turning on
What is not working. My hotspot was working, but now it is not. I thought it might be a corrupted Pi-Star system because it failed several months ago and I got working by reinstalling Pi-Star. This time I can not get working after re-installing Pi-star. The LED screen remains blank. There is no "Pi-Star Setup" WiFi Network being broadcast to other devices. Also, there is not video signal going out the HDMI port.
What is working. The Pi-Zero board appears to be working fine. Used a small linux distro and was able to boot up the system without errors.
Looking for a way to do a hardware reset and other ideas to try
Thanks
How can I do factory\hardware reset for MMDVM?
Re: How can I do factory\hardware reset for MMDVM?
Thanks, I will try your suggestions and see if I can get it working again. I will report back with my results
Re: How can I do factory\hardware reset for MMDVM?
I was using the wrong pi-star image. Working now. Thanks for the support feedback it helped isolate the problem.
Re: How can I do factory\hardware reset for MMDVM?
hi i got similar problem
solid green light on modem, i flash install all over but still green light on modrm how to fix or modem went bad?
solid green light on modem, i flash install all over but still green light on modrm how to fix or modem went bad?
Re: How can I do factory\hardware reset for MMDVM?
well when i ran the logs it tells me fail to int after 6 tries
Re: How can I do factory\hardware reset for MMDVM?
It may be worth removing and reseating the HAT a few times, sometimes the pins on the connectors tarnish and make poor connections. A few wipe cycles will restore function if this has happened in your case.
--
Brian G8SEZ
Brian G8SEZ
Re: How can I do factory\hardware reset for MMDVM?
tried that same issue i think i got a bad modem, will return it and ask them to send another one