DV-Rptr1 Raspberry 3B+ Pi-Star 4.1.0

DVR-PTR V1, V2 and V3 Support
Post Reply
DO1SGL
Posts: 2
Joined: Sat Apr 11, 2020 10:48 am

DV-Rptr1 Raspberry 3B+ Pi-Star 4.1.0

Post by DO1SGL » Mon Apr 20, 2020 4:35 pm

I have a DV-Rptr1 here and it once worked with Pi-Star. Now I wanted to use a Raspberry B + and the current PI-Star 4.0 but the DV-Rptr1 does not seem to work or is doing something wrong. Could it be that the DV-Rptr1 only works with a Raspberry 3 B and the PI-Star version 3.4.17 ??????? Can you tell me which controller I have to set to make it work ??? I hope you could help me further. 73 de Stefan, DO1SGL

M1DNS
Posts: 810
Joined: Thu Apr 05, 2018 5:30 am

Re: DV-Rptr1 Raspberry 3B+ Pi-Star 4.1.0

Post by M1DNS » Mon Apr 20, 2020 7:45 pm

Setup pistar as a dstarrepeater setup. The dvrptr card won't run as a pistar Mmdvmhsost setup.

Also, don't run the 4.0 install it's now defunct. Install 4.1


Sent from my SM-G935F using Tapatalk


Andrew M1DNS.
Pi-star Admin Team.

DO1SGL
Posts: 2
Joined: Sat Apr 11, 2020 10:48 am

Re: DV-Rptr1 Raspberry 3B+ Pi-Star 4.1.0

Post by DO1SGL » Mon Apr 20, 2020 9:30 pm

Yes I have now installed Pi-Star 4.1.0, when I go to the DStarRepeater where do I have to do the fine adjustment ...?.? Is there a rough direction of how the settings have to be ????? I have unfortunately found nothing on the net where this information is ..

M1DNS
Posts: 810
Joined: Thu Apr 05, 2018 5:30 am

Re: DV-Rptr1 Raspberry 3B+ Pi-Star 4.1.0

Post by M1DNS » Mon Apr 20, 2020 9:50 pm

The parameters will be different depending which radio you are using alongside the card.
Rx invert, Tx invert, Rx audio, Tx audio. Will all need adjusting.

Sent from my SM-G935F using Tapatalk

Andrew M1DNS.
Pi-star Admin Team.

Post Reply