Dv-Rptr V1

DVR-PTR V1, V2 and V3 Support
Post Reply
Posts: 1
Joined: Thu Oct 11, 2018 2:09 pm

Dv-Rptr V1

Post by Kb0sho » Sat Oct 13, 2018 5:31 pm

Can anyone share with me the dstarrepeater configuration settings to run pi-star, I have the ambe board and want to use external mike. Any help would be appreciated. Thanks in advance.
Karl (Kb0sho)

Posts: 57
Joined: Tue Dec 25, 2018 12:50 am

Re: Dv-Rptr V1

Post by VK4TUX » Sun Mar 03, 2019 11:11 am

There is no support in dstarrepeater for the ambe board settings
Last edited by VK4TUX on Wed Mar 06, 2019 10:50 pm, edited 2 times in total.

Posts: 203
Joined: Thu Apr 05, 2018 5:30 am

Re: Dv-Rptr V1

Post by M1DNS » Sun Mar 03, 2019 6:54 pm

Dstarrepeater will support the board if it is fitted onto the dvrptr v1.

Unfortunately there's no way to configure the ambe setup using Dstarrepeater, so you'll need the ambe vers. of the dvrptr control panel to first set up vol levels etc. But once that is done you can use the dvrptr and ambe daughter card with Dstarrepeater. And works well.
With one of my setups I have the two running Dstarrepeater as a no-radio internet only setup via a spkr-mic plugged into this combo.

Andrew M1DNS, (Mod)

Andrew M1DNS.
Pi-star Admin Team.

Post Reply