Recommended Radios For Use On PI-Star

Radio Equipment that can be used in Amateur Radio and where to get them. User support for those little problems that frequently occur and other little issues relation to Radio Equipment
Post Reply
G4HDS
Posts: 8
Joined: Thu Apr 12, 2018 8:42 pm

Recommended Radios For Use On PI-Star

Post by G4HDS » Tue Jun 12, 2018 10:04 pm

I'd like to be able to use my existing multimode radio which is tied up on MB6IRV so i need a replacement.

So Can anyone recommend me a solid reliable Radio for 24/7 use in an MB6 gateway please.

I'm finding gear like some of the standard Radio's, even with their dedicated 9K6 ports just are not up to it.

Perhaps EX PMR is the way to go ?

Are there any decent EX PMR suppliers still going these days

Regards Paul G4HDS

G4HDS
Posts: 8
Joined: Thu Apr 12, 2018 8:42 pm

Re: Recommended Radios For Use On PI-Star

Post by G4HDS » Sat Jun 16, 2018 9:11 pm

I can confirm the FT817 fitted with the TXCO works well in the DMR mode on my gateway MB6IRV

No mods were required just fed the signal from my MMDVM board into the MINI D data socket.

73 Paul

G4HDS
Posts: 8
Joined: Thu Apr 12, 2018 8:42 pm

Re: Recommended Radios For Use On PI-Star

Post by G4HDS » Sat Jun 16, 2018 9:16 pm

Tested an old FT90, althought his radio has a 9600 Baud option its proven to be difficult.

Not surprising really given the age of this radio.

73 Paul

MI0AAZ
Posts: 1
Joined: Mon Jun 18, 2018 6:53 pm
Location: Kilrea, Coleraine, Northern Ireland

Re: Recommended Radios For Use On PI-Star

Post by MI0AAZ » Mon Jun 18, 2018 8:26 pm

Have you a figure in mind for a UHF PMR radio, i have a Tait here which i know works well as a simplex hotspot ?
73 John Mi0AAZ.
Keeper of the GB7KA multimode repeater.

G4HDS
Posts: 8
Joined: Thu Apr 12, 2018 8:42 pm

Re: Recommended Radios For Use On PI-Star

Post by G4HDS » Tue Jun 19, 2018 8:53 pm

Hi John,
I've just picked up a GM350 For use on MB6IRV so i'm sorted now.

However thanks for the offer

Paul

G4HDS
Posts: 8
Joined: Thu Apr 12, 2018 8:42 pm

Re: Recommended Radios For Use On PI-Star

Post by G4HDS » Mon Jul 09, 2018 5:34 pm

I now have a four channel GM350 Running on Pi-Star.

The four channel version does need some mod's fitting ! By default the Data connections to the 15 Pin Acc socket are NOT connected.

Mod's for this radio are well documented HOWEVER I did find that my unit needed the Audio input level setting to max on both the MMDVM pcb

and in the software settings.

Your "mileage may vary" as they say, but depending on your MMDVM pcb you may need to add small wide band audio buffer amp.

73 Paul

2E0LGZ
Posts: 52
Joined: Sat Jun 16, 2018 3:10 pm

Re: Recommended Radios For Use On PI-Star

Post by 2E0LGZ » Fri Nov 30, 2018 2:12 pm

using a FTM-400 connected to a Zum radio mmdvm rev 0.9 on a raspberry pi for MB6IGZ node and works very well

Post Reply