I'd like to be able to use my existing multimode radio which is tied up on MB6IRV so i need a replacement.
So Can anyone recommend me a solid reliable Radio for 24/7 use in an MB6 gateway please.
I'm finding gear like some of the standard Radio's, even with their dedicated 9K6 ports just are not up to it.
Perhaps EX PMR is the way to go ?
Are there any decent EX PMR suppliers still going these days
Regards Paul G4HDS
Recommended Radios For Use On PI-Star
Re: Recommended Radios For Use On PI-Star
I can confirm the FT817 fitted with the TXCO works well in the DMR mode on my gateway MB6IRV
No mods were required just fed the signal from my MMDVM board into the MINI D data socket.
73 Paul
No mods were required just fed the signal from my MMDVM board into the MINI D data socket.
73 Paul
Re: Recommended Radios For Use On PI-Star
Tested an old FT90, althought his radio has a 9600 Baud option its proven to be difficult.
Not surprising really given the age of this radio.
73 Paul
Not surprising really given the age of this radio.
73 Paul
Re: Recommended Radios For Use On PI-Star
Have you a figure in mind for a UHF PMR radio, i have a Tait here which i know works well as a simplex hotspot ?
73 John Mi0AAZ.
Keeper of the GB7KA multimode repeater.
73 John Mi0AAZ.
Keeper of the GB7KA multimode repeater.
Re: Recommended Radios For Use On PI-Star
Hi John,
I've just picked up a GM350 For use on MB6IRV so i'm sorted now.
However thanks for the offer
Paul
I've just picked up a GM350 For use on MB6IRV so i'm sorted now.
However thanks for the offer
Paul
Re: Recommended Radios For Use On PI-Star
I now have a four channel GM350 Running on Pi-Star.
The four channel version does need some mod's fitting ! By default the Data connections to the 15 Pin Acc socket are NOT connected.
Mod's for this radio are well documented HOWEVER I did find that my unit needed the Audio input level setting to max on both the MMDVM pcb
and in the software settings.
Your "mileage may vary" as they say, but depending on your MMDVM pcb you may need to add small wide band audio buffer amp.
73 Paul
The four channel version does need some mod's fitting ! By default the Data connections to the 15 Pin Acc socket are NOT connected.
Mod's for this radio are well documented HOWEVER I did find that my unit needed the Audio input level setting to max on both the MMDVM pcb
and in the software settings.
Your "mileage may vary" as they say, but depending on your MMDVM pcb you may need to add small wide band audio buffer amp.
73 Paul
Re: Recommended Radios For Use On PI-Star
using a FTM-400 connected to a Zum radio mmdvm rev 0.9 on a raspberry pi for MB6IGZ node and works very well
Re: Recommended Radios For Use On PI-Star
I am currently using a Motorola GM-340 with a ZUM 1.0.1/MMDVM modem on a Due. This works really well and is basically a simplex version of F5UII repeater using two GM360s.
Nick - G4IRX - AC8OB
IO92JV - EN70VN
IO92JV - EN70VN
Re: Recommended Radios For Use On PI-Star
Here
I am using 2 Motorola CDM-1550LX+ with a ZUM 1.0.1/MMDVM modem on a Due. Working fine.
VA2DGR ID:302233 on Brandmeister
I am using 2 Motorola CDM-1550LX+ with a ZUM 1.0.1/MMDVM modem on a Due. Working fine.
VA2DGR ID:302233 on Brandmeister
73's
Daniel VA2DG
Daniel VA2DG
Re: Recommended Radios For Use On PI-Star
I use 3 GD-77 (with OpenGD77 firmware) + with simplex (PI0), dual (PI3) and even one of my GD77 in HotSpot (DMR). It works very well.
.
. 73 de Thierry![Wink ;)](./images/smilies/icon_e_wink.gif)
![Wink ;)](./images/smilies/icon_e_wink.gif)
.
. 73 de Thierry
![Wink ;)](./images/smilies/icon_e_wink.gif)