How can i manage Pocsag-commands in Pistar ssh?

Here is where you can get help with using and setting up POCSAG and related topics
yo3vth
Posts: 21
Joined: Sat Feb 02, 2019 3:26 pm
Location: KN34al

Re: How can i manage Pocsag-commands in Pistar ssh?

Post by yo3vth » Mon May 06, 2019 3:26 pm

Must create more space for the blacklist line or menu in pistar to unsubscribe rubrics (and how to do that from pistar-menu) !!!
We need only the ham traffic. No other feeds "Strom an, Strom aus" :))) Or encrypted.
pocsag.jpg
pocsag.jpg (122.84 KiB) Viewed 536 times
Pi-Star Digital Voice Dashboard for YO3VTH : http://yo3vth.go.ro/

MW0MWZ
Site Admin
Posts: 898
Joined: Wed Apr 04, 2018 9:15 pm
Location: Wales, UK
Contact:

Re: How can i manage Pocsag-commands in Pistar ssh?

Post by MW0MWZ » Mon May 13, 2019 2:38 pm

Extended the black/white lists to 200 chars, see if that helps.
Andy

73 de MW0MWZ
http://pistar.uk

MW0MWZ
Site Admin
Posts: 898
Joined: Wed Apr 04, 2018 9:15 pm
Location: Wales, UK
Contact:

Re: How can i manage Pocsag-commands in Pistar ssh?

Post by MW0MWZ » Mon May 13, 2019 8:39 pm

You might also be interested in this too: viewtopic.php?f=49&t=1770
Andy

73 de MW0MWZ
http://pistar.uk

yo3vth
Posts: 21
Joined: Sat Feb 02, 2019 3:26 pm
Location: KN34al

Re: How can i manage Pocsag-commands in Pistar ssh?

Post by yo3vth » Mon May 13, 2019 9:51 pm

MW0MWZ wrote:
Mon May 13, 2019 2:38 pm
Extended the black/white lists to 200 chars, see if that helps.
Great news. Thanks !
(And to not see any 10 minutes my own online status - i put my ID/RIC in the blacklist too.)
(To SEE others CQ/tests i left whitelist blank/empty)
Pi-Star Digital Voice Dashboard for YO3VTH : http://yo3vth.go.ro/

yo3vth
Posts: 21
Joined: Sat Feb 02, 2019 3:26 pm
Location: KN34al

Re: How can i manage Pocsag-commands in Pistar ssh?

Post by yo3vth » Sat May 18, 2019 9:31 pm

MW0MWZ wrote:
Mon May 13, 2019 2:38 pm
Extended the black/white lists to 200 chars, see if that helps.


Hi again!
Can you extend more chars please?
At least +100 more if you can...
Thanks!
Pi-Star Digital Voice Dashboard for YO3VTH : http://yo3vth.go.ro/

MW0MWZ
Site Admin
Posts: 898
Joined: Wed Apr 04, 2018 9:15 pm
Location: Wales, UK
Contact:

Re: How can i manage Pocsag-commands in Pistar ssh?

Post by MW0MWZ » Tue Jun 04, 2019 2:34 pm

Out of interest - have you set the tx-area for your pager system so that you only get pages for your country - that would stop a lot of the traffic you are probably trying to blank out.
Andy

73 de MW0MWZ
http://pistar.uk

yo3vth
Posts: 21
Joined: Sat Feb 02, 2019 3:26 pm
Location: KN34al

Re: How can i manage Pocsag-commands in Pistar ssh?

Post by yo3vth » Wed Jun 05, 2019 3:40 pm

MW0MWZ wrote:
Tue Jun 04, 2019 2:34 pm
"have you set the tx-area for your pager system"
How to do that? - was my first question in this topic - for the pistar (I repeat - for pistar). - unanswered
What about "tx-area" you talking ? Maibe you and my are not in the same frequency...

Why to focus only to one (my) country ? Is my bussiness how many countries i watch.
I watch all rx that came in pistar (default, without my id in whitelist). (RX=listen/read ; TX=transmit/write)

And yes, many rubrics in pistar sind "out of interest" as you say.

Please read the topic from beginning - at end is a request to extend the blacklist with more chars.
No need from you to produce unnecessary challenges here in this topic.
Simple. And keep it simple. I already repeat for you: PLEASE extent the blacklist! Thanks
Just do it!
Pi-Star Digital Voice Dashboard for YO3VTH : http://yo3vth.go.ro/

MW0MWZ
Site Admin
Posts: 898
Joined: Wed Apr 04, 2018 9:15 pm
Location: Wales, UK
Contact:

Re: How can i manage Pocsag-commands in Pistar ssh?

Post by MW0MWZ » Wed Jun 05, 2019 8:00 pm

yo3vth wrote:
Wed Jun 05, 2019 3:40 pm
Why to focus only to one (my) country ? Is my bussiness how many countries i watch.
...
Please read the topic from beginning - at end is a request to extend the blacklist with more chars.
No need from you to produce unnecessary challenges here in this topic.
Simple. And keep it simple. I already repeat for you: PLEASE extent the blacklist! Thanks
Just do it!
:shock: :shock: :shock:

Just wow
Andy

73 de MW0MWZ
http://pistar.uk

yo3vth
Posts: 21
Joined: Sat Feb 02, 2019 3:26 pm
Location: KN34al

Re: How can i manage this Pocsag-commands in Pistar ssh?

Post by yo3vth » Wed Jun 05, 2019 8:37 pm

yo3vth wrote:
Fri Feb 15, 2019 3:15 am
I talk about Pistar and i dont need to put my RIC in the "whitelist", it blocks all traffic.
I need only to get rid of the rubrics like the "caesars-cipher", time-announcements, ISS-announces, wake-time to every 10min and so on.
Only to show the "cq"-s, tests from other online people.
Just want to get rid from rubrics in Pistar, to manage subscriptions by myself, ok?
I wanna know all commands in Pistar, not just one "hello-world" command.


15 Feb 2019, 05:15 :shock:
Pi-Star Digital Voice Dashboard for YO3VTH : http://yo3vth.go.ro/

yo3vth
Posts: 21
Joined: Sat Feb 02, 2019 3:26 pm
Location: KN34al

Now ok, enough space...

Post by yo3vth » Mon Jun 17, 2019 8:14 pm

Many thanks, i saw it today.
Now is enough space for the blacklist.
:D
Pi-Star Digital Voice Dashboard for YO3VTH : http://yo3vth.go.ro/

Post Reply