Hi,
I'm on v1.4.3, pi-star 3.4.16, Dashboard 20180713, but still no POSCAG options?
On Zumspot v1.4.3 and no POCSAG
Re: On Zumspot v1.4.3 and no POCSAG
After I apply a firmware update that supports a feature and reboot, I always go to the Pi-Star Configuration page and apply changes.
In this case, after you apply changes, you should see a POCSAG toggle in the MMDVMHost Configuration section, near the bottom of the list, after DMR2NXDN. After you toggle that on and apply changes again, a new POCSAG Configuration section will be displayed.
In this case, after you apply changes, you should see a POCSAG toggle in the MMDVMHost Configuration section, near the bottom of the list, after DMR2NXDN. After you toggle that on and apply changes again, a new POCSAG Configuration section will be displayed.
73, Toshen, KE0FHS
Playing with Pi-Star (unofficial notes about setting up and using Pi-Star):
https://amateurradionotes.com/pi-star.htm
Playing with Pi-Star (unofficial notes about setting up and using Pi-Star):
https://amateurradionotes.com/pi-star.htm