4.0.0RC3 DMR+ Options= odd behavior

Help with DMR issues
Post Reply
VE6DV
Posts: 14
Joined: Sun May 13, 2018 4:34 pm
Location: Edmonton, Alberta

4.0.0RC3 DMR+ Options= odd behavior

Post by VE6DV » Sat Feb 09, 2019 9:56 pm

I have noticed an odd behavior in Pi-STAR 4.0.0RC3 when connecting to a DMR+ master server. I enabled a command in the Options= section and it worked well. But when I removed the option and applied updates it still performed the command even though nothing was in the box.

Any idea what is going on?
73 - Jeff VE6DV

MW0MWZ
Site Admin
Posts: 726
Joined: Wed Apr 04, 2018 9:15 pm
Location: Wales, UK
Contact:

Re: 4.0.0RC3 DMR+ Options= odd behavior

Post by MW0MWZ » Mon Feb 11, 2019 9:32 pm

Depends on what the command was - some settings are set by the master too, either way its not a Pi-Star setting if the option isnt there.
Andy

73 de MW0MWZ
http://pistar.uk

User avatar
VK7HSE
Posts: 121
Joined: Sun Apr 15, 2018 6:35 pm
Contact:

Re: 4.0.0RC3 DMR+ Options= odd behavior

Post by VK7HSE » Tue Feb 12, 2019 10:40 am

If you have disabled DMR and then reactivate it you'll lose those settings in the options box for DMR+/IPSC2

So you just need to enter them again!

Code: Select all

StartRef=4800;RelinkTime=60;UserLink=1
Just change the reflector number to suit what you want.

If you are only connecting to a IPSC2 server then the syntax is a bit different...

Code: Select all

TS2_1=505;TS2_2=3807;TS1_1=13;TS1_2=113;TS1_3=123;TS1_4=3809;TS1_5=3810
These examples are for Australian talkgroups...

Sent from my Pixel 2 XL using Tapatalk


User avatar
VK7HSE
Posts: 121
Joined: Sun Apr 15, 2018 6:35 pm
Contact:

Re: 4.0.0RC3 DMR+ Options= odd behavior

Post by VK7HSE » Tue Feb 12, 2019 10:42 am

Oops my last post isn't the answer to your question! But still kinda relevant...

Sent from my Pixel 2 XL using Tapatalk


Post Reply