SMS Report messages via my hotspot?

Help with DMR issues
Post Reply
User avatar
G0NMY
Posts: 14
Joined: Wed Apr 11, 2018 2:22 pm
Location: IO83VA
Contact:

SMS Report messages via my hotspot?

Post by G0NMY » Wed Apr 25, 2018 12:51 pm

Is there a way to get the SMS WX report or other SMS reports to work via my hotspot.
The messages are sent to DMR-ID 262993 for WX and 262994 for RPT
Obviously this is designed to work via a repeater linked to BrandMeister network.
I also have radio set to Chinese Radio in my BrandMeister selfcare settings.
And my 380 has Md380tools loaded and Monitor enabled.
So is there a way to re-route to get the messages to 262993 and 262994?
Or will this never work via a hotspot???

Would love to get this to work.
:D
¡ʎɐqǝ ɟɟo pɹɐoqʎǝʞ ɐ ʎnq ı ǝɯıʇ ʇsɐן ǝɥʇ sı sıɥʇ

G1IUL
Posts: 3
Joined: Thu Apr 12, 2018 7:49 am

Re: SMS Report messages via my hotspot?

Post by G1IUL » Wed Apr 25, 2018 9:30 pm

Following this. I am trying to get Wx reports working on my Anytone D868 UV. I send a help message to 262993 and in the logs I see the message go and the message received from 262993. The green light on the radio comes on but no message received. I suspect it is a radio setting but any advice is gratefully received. I am running a duplex mmdv board on a raspberry pi 3
M: 2018-04-25 21:28:41.917 DMR Slot 1, received RF Data Preamble CSBK (10 to follow) from G1IUL to 262993
M: 2018-04-25 21:28:41.977 DMR Slot 1, received RF Data Preamble CSBK (9 to follow) from G1IUL to 262993
M: 2018-04-25 21:28:42.036 DMR Slot 1, received RF Data Preamble CSBK (8 to follow) from G1IUL to 262993
M: 2018-04-25 21:28:42.102 DMR Slot 1, received RF Data Preamble CSBK (7 to follow) from G1IUL to 262993
M: 2018-04-25 21:28:42.157 DMR Slot 1, received RF Data Preamble CSBK (6 to follow) from G1IUL to 262993
M: 2018-04-25 21:28:42.217 DMR Slot 1, received RF data header from G1IUL to 262993, 5 blocks
M: 2018-04-25 21:28:42.516 DMR Slot 1, ended RF data transmission
M: 2018-04-25 21:28:44.664 DMR Slot 1, received network Data Preamble CSBK (54 to follow) from 262993 to G1IUL
M: 2018-04-25 21:28:44.721 DMR Slot 1, received network data header from 262993 to G1IUL, 53 blocks
M: 2018-04-25 21:28:47.933 DMR Slot 1, ended network data transmission

User avatar
G0NMY
Posts: 14
Joined: Wed Apr 11, 2018 2:22 pm
Location: IO83VA
Contact:

Re: SMS Report messages via my hotspot?

Post by G0NMY » Thu Apr 26, 2018 12:57 am

G1IUL wrote:
Wed Apr 25, 2018 9:30 pm
Following this. I am trying to get Wx reports working on my Anytone D868 UV. I send a help message to 262993 and in the logs I see the message go and the message received from 262993. The green light on the radio comes on but no message received. I suspect it is a radio setting but any advice is gratefully received. I am running a duplex mmdv board on a raspberry pi 3
M: 2018-04-25 21:28:41.917 DMR Slot 1, received RF Data Preamble CSBK (10 to follow) from G1IUL to 262993
M: 2018-04-25 21:28:41.977 DMR Slot 1, received RF Data Preamble CSBK (9 to follow) from G1IUL to 262993
M: 2018-04-25 21:28:42.036 DMR Slot 1, received RF Data Preamble CSBK (8 to follow) from G1IUL to 262993
M: 2018-04-25 21:28:42.102 DMR Slot 1, received RF Data Preamble CSBK (7 to follow) from G1IUL to 262993
M: 2018-04-25 21:28:42.157 DMR Slot 1, received RF Data Preamble CSBK (6 to follow) from G1IUL to 262993
M: 2018-04-25 21:28:42.217 DMR Slot 1, received RF data header from G1IUL to 262993, 5 blocks
M: 2018-04-25 21:28:42.516 DMR Slot 1, ended RF data transmission
M: 2018-04-25 21:28:44.664 DMR Slot 1, received network Data Preamble CSBK (54 to follow) from 262993 to G1IUL
M: 2018-04-25 21:28:44.721 DMR Slot 1, received network data header from 262993 to G1IUL, 53 blocks
M: 2018-04-25 21:28:47.933 DMR Slot 1, ended network data transmission
Well atleast you appear to be getting a response.
Looking on DL2MF's page he outlines setting for the MD380,
http://dl2mf.de/md380tools/DL2MF_MD380T ... ew.htm#sms
As in NetMon active but from what I gather this is purely for a single key press to work.
Also in my Brandmeister selfcare page I have set radio to Chinese Radio.

Obviously I am not sure if these settings apply to your D868UV ?
Anyway I wish you luck and would love to hear if you get it working.
It may be that it only works via a repeater on slot 1 and that is why I get no response on my hot spot as it only uses slot2.
Cheers Anyway 73 Mark G0NMY :)
¡ʎɐqǝ ɟɟo pɹɐoqʎǝʞ ɐ ʎnq ı ǝɯıʇ ʇsɐן ǝɥʇ sı sıɥʇ

G1IUL
Posts: 3
Joined: Thu Apr 12, 2018 7:49 am

Re: SMS Report messages via my hotspot?

Post by G1IUL » Thu Apr 26, 2018 10:29 am

It does the same if I send it via Slot 2

User avatar
MW0MWZ
Site Admin
Posts: 1074
Joined: Wed Apr 04, 2018 9:15 pm
Location: Wales, UK
Contact:

Re: SMS Report messages via my hotspot?

Post by MW0MWZ » Thu May 03, 2018 7:09 am

I've been talking to a few people recently about DMR SMS, one of the problems with it, is that its not a standard.
What that means is that different radio vendors have implemented their own SMS format, having it work on one radio and not on another, is *sadly* just kinda how it is :(
Andy

73 de MW0MWZ
http://pistar.uk

User avatar
G0NMY
Posts: 14
Joined: Wed Apr 11, 2018 2:22 pm
Location: IO83VA
Contact:

Re: SMS Report messages via my hotspot?

Post by G0NMY » Sat May 05, 2018 2:00 pm

MW0MWZ wrote:
Thu May 03, 2018 7:09 am
I've been talking to a few people recently about DMR SMS, one of the problems with it, is that its not a standard.
What that means is that different radio vendors have implemented their own SMS format, having it work on one radio and not on another, is *sadly* just kinda how it is :(
Ahh that makes sense I know you have to set compressed UDP data header, but if the protocol is not fixed then taking a wizz on a windy day comes to mind :lol: :lol:

Cheers Mark
¡ʎɐqǝ ɟɟo pɹɐoqʎǝʞ ɐ ʎnq ı ǝɯıʇ ʇsɐן ǝɥʇ sı sıɥʇ

Post Reply