CAN-TRBO not showing in DMR Master dropdown
CAN-TRBO not showing in DMR Master dropdown
Tried rebooting and updating the zumspot and CAN-TRBO is not in the dropdown. Any ideas/suggestions?
Re: CAN-TRBO not showing in DMR Master dropdown
This has been an on-going problem with the updates to DMR_Hosts files.
May have to create a local version in root.
The Aug-16 version is still bad.
http://www.pistar.uk/downloads/DMR_Hosts.txt
73, Ron
May have to create a local version in root.
The Aug-16 version is still bad.
http://www.pistar.uk/downloads/DMR_Hosts.txt
73, Ron
Re: CAN-TRBO not showing in DMR Master dropdown
If you're like me and use DMR+_IPSC2-CAN-TRBO server a lot then it's worth creating a static entry for it.
The file /root/DMR_Hosts.txt is already in Pi-Star so you just need to add this server to it.
SSH in, rpi-rw, then "sudo pico /root/DMR_Hosts.txt".
You can either manually type in the info or Right-click and select Paste from Browser and copy this text into the box.
Be sure to go back and edit the line so that it has TABs instead of spaces.
After Update the server will load it but sometimes at the end of the list, but at least it will always be there.
73, Ron
VE1AIC
DMR+_IPSC2-CAN-TRBO 159622 207.35.36.178 PASSWORD 55555
The file /root/DMR_Hosts.txt is already in Pi-Star so you just need to add this server to it.
SSH in, rpi-rw, then "sudo pico /root/DMR_Hosts.txt".
You can either manually type in the info or Right-click and select Paste from Browser and copy this text into the box.
Be sure to go back and edit the line so that it has TABs instead of spaces.
After Update the server will load it but sometimes at the end of the list, but at least it will always be there.
73, Ron
VE1AIC
DMR+_IPSC2-CAN-TRBO 159622 207.35.36.178 PASSWORD 55555
Re: CAN-TRBO not showing in DMR Master dropdown
Can this be done via the "expert" option on the configuration page in place of this? If so, how would it look? I'm not a software person (for the last 20 years anyway!)VE1AIC wrote: ↑Fri Aug 16, 2019 2:16 pm If you're like me and use DMR+_IPSC2-CAN-TRBO server a lot then it's worth creating a static entry for it.
The file /root/DMR_Hosts.txt is already in Pi-Star so you just need to add this server to it.
SSH in, rpi-rw, then "sudo pico /root/DMR_Hosts.txt".
You can either manually type in the info or Right-click and select Paste from Browser and copy this text into the box.
Be sure to go back and edit the line so that it has TABs instead of spaces.
After Update the server will load it but sometimes at the end of the list, but at least it will always be there.
73, Ron
VE1AIC
DMR+_IPSC2-CAN-TRBO 159622 207.35.36.178 PASSWORD 55555
[DMR Network 2]
Enabled=0
Address=192.241.175.221
Port=55555
TGRewrite0=2,8,2,9,1
PCRewrite0=2,84000,2,4000,1001
Password=PASSWORD
Debug=0
Id=3138325
Name=DMR+_IPSC2-NewYork
Re: CAN-TRBO not showing in DMR Master dropdown
CAN-TRBO is not the only one dissapeared...
I also miss:
DMR+_IPSC2-Catalunya 306720 217.61.2.11
I've added it to the CUSTOM area at the end of DMRHots.txt.
It is here:
/usr/local/etc/DMR_Hosts.txt
For those not so pratice to edit files...
Do this way:
Go Config, Expert, SSH.
Enter user & password.
Type: rpi-rw (this provides Read Write permissions)
sudo nano /usr/local/etc/DMR_Hosts.txt (to edit the file. NOTE: Use Upper/Lower case like this Linux is Case Sensitive)
Now use END key on the keyboard to go bottom.
Add whatever you need.
Press CTRL+O (to save the changes)
PressCTRL+X (to exit editor)
Now you can select you server (it will be at the bottom of the list)
SAMPLE:
#
###########################################################################$
#
# Custom DMR Hosts
#
###########################################################################$
# Name DMR-ID IP/Hostname Pas$
###########################################################################$
#BM_Custom_01 1234 1.2.3.4 pas$
#DMR+_Custom_01 1234 1.2.3.4 PAS$
###########################################################################$
DMR+_IPSC2-CAN-TRBO 159622 207.35.36.178 PASS
DMR+_IPSC2-Catalunya 306720 217.61.2.11 PAS$
I also miss:
DMR+_IPSC2-Catalunya 306720 217.61.2.11
I've added it to the CUSTOM area at the end of DMRHots.txt.
It is here:
/usr/local/etc/DMR_Hosts.txt
For those not so pratice to edit files...
Do this way:
Go Config, Expert, SSH.
Enter user & password.
Type: rpi-rw (this provides Read Write permissions)
sudo nano /usr/local/etc/DMR_Hosts.txt (to edit the file. NOTE: Use Upper/Lower case like this Linux is Case Sensitive)
Now use END key on the keyboard to go bottom.
Add whatever you need.
Press CTRL+O (to save the changes)
PressCTRL+X (to exit editor)
Now you can select you server (it will be at the bottom of the list)
SAMPLE:
#
###########################################################################$
#
# Custom DMR Hosts
#
###########################################################################$
# Name DMR-ID IP/Hostname Pas$
###########################################################################$
#BM_Custom_01 1234 1.2.3.4 pas$
#DMR+_Custom_01 1234 1.2.3.4 PAS$
###########################################################################$
DMR+_IPSC2-CAN-TRBO 159622 207.35.36.178 PASS
DMR+_IPSC2-Catalunya 306720 217.61.2.11 PAS$
73'Rafael.
EA3BIL
JN11an
EA3BIL
JN11an
Re: CAN-TRBO not showing in DMR Master dropdown
You'll have better results if you add your modifications to the DMR_Hosts.txt file (capitalization important) in the root directory; otherwise, the changes you make in /usr/local/etc/DMR_Hosts.txt will get overwritten the next time you run a Pi-Star Update.
For example, using the Nano editor:
Insert your changes, write your changes, exit the Nano editor, revert to read-only mode (rpi-ro), and then run a Pi-Star Update. The Update will append the modifications to the /usr/local/etc/DMR_Hosts.txt file.
For example, using the Nano editor:
Code: Select all
rpi-rw
sudo su -
nano DMR_Hosts.txt
73, Toshen, KE0FHS
Playing with Pi-Star (unofficial notes about setting up and using Pi-Star):
https://amateurradionotes.com/pi-star.htm
Playing with Pi-Star (unofficial notes about setting up and using Pi-Star):
https://amateurradionotes.com/pi-star.htm
Re: CAN-TRBO not showing in DMR Master dropdown
Ok...
I'll do that way.
Thanks for the advice !!
I'll do that way.
Thanks for the advice !!
73'Rafael.
EA3BIL
JN11an
EA3BIL
JN11an
Re: CAN-TRBO not showing in DMR Master dropdown
BTW...
Any ideas about why have dissapeared some IPSC2 masters (as the one said before) ??
Any ideas about why have dissapeared some IPSC2 masters (as the one said before) ??
73'Rafael.
EA3BIL
JN11an
EA3BIL
JN11an
Re: CAN-TRBO not showing in DMR Master dropdown
I just checked the latest source:
http://www.pistar.uk/downloads/DMR_Hosts.txt
# Updated 21-Aug-2019
.
.
DMR+_IPSC2-Australia 182702 103.93.139.189 PASSWORD 55555
DMR+_IPSC2-Australia-DMO 177333 103.93.139.188 PASSWORD 55555
DMR+_IPSC2-BRAZIL 393339 201.62.48.62 PASSWORD 55555
DMR+_IPSC2-BULGARIA 143495 77.85.192.92 PASSWORD 55555
DMR+_IPSC2-DK 131399 77.243.52.150 PASSWORD 55555
DMR+_IPSC2-DL-HOTSPO 328782 91.132.144.235 PASSWORD 55555
So a number of IPSC2 servers are still missing, nothing beginning with "C".
Maybe Andy can check his source.
-Ron
VE1AIC
http://www.pistar.uk/downloads/DMR_Hosts.txt
# Updated 21-Aug-2019
.
.
DMR+_IPSC2-Australia 182702 103.93.139.189 PASSWORD 55555
DMR+_IPSC2-Australia-DMO 177333 103.93.139.188 PASSWORD 55555
DMR+_IPSC2-BRAZIL 393339 201.62.48.62 PASSWORD 55555
DMR+_IPSC2-BULGARIA 143495 77.85.192.92 PASSWORD 55555
DMR+_IPSC2-DK 131399 77.243.52.150 PASSWORD 55555
DMR+_IPSC2-DL-HOTSPO 328782 91.132.144.235 PASSWORD 55555
So a number of IPSC2 servers are still missing, nothing beginning with "C".
Maybe Andy can check his source.
-Ron
VE1AIC
Re: CAN-TRBO not showing in DMR Master dropdown
FYI as of today the Pi-Star DMR_Host file does have DMR+_IPSC2-CAN-TRBO back again.
-Ron
-Ron