DMR Gateway dropping out
Posted: Sat Feb 01, 2020 10:40 am
Hi all,
I did try to search the forum before posting, but apparently DMR Gateway is too common of a search term so no bueno...
I decided to try play with DMR Gateway today, with the intent to run BM, DMR+ and XLX. I read as much docco as I could find and watched W1MSG videos.
I configured it all and everything appears to be set correctly, but it doesn't want to play nice. I do not get any voice confirmations from the Pi-Star, DMR+ and BM seem to connect but I am not getting through. XLX connects, and it seems to work as I can see myself on the XLX reflector dashboard and it seems to change modules on demand, but I get no confirmation at my end. I am also hearing the traffic from the XLX reflector.
Here's the real kicker, I notice the DMR tile goes red intermittently and DMR Gateway seems to stop, then restart. I have run the log and it concurs, I have attached the log so you can see (drop box link).
https://www.dropbox.com/s/c0dtl7oaj5n11 ... m.png?dl=0
I have tried changing masters, disabling modes etc all with no change in behaviour.
If I switch back to straight DMR+ or BM it works perfectly
Any ideas?
Rasp Pi B3
STM 32 Board from Repeater Builder
BM MASTER: BM_Australia_5051
DMR+ MASTER: DMR+IPSC2=VKHOTSPOT
XLX MASTER: XLX505
Thanks in advance
de Pete VK2MPJ
I did try to search the forum before posting, but apparently DMR Gateway is too common of a search term so no bueno...
I decided to try play with DMR Gateway today, with the intent to run BM, DMR+ and XLX. I read as much docco as I could find and watched W1MSG videos.
I configured it all and everything appears to be set correctly, but it doesn't want to play nice. I do not get any voice confirmations from the Pi-Star, DMR+ and BM seem to connect but I am not getting through. XLX connects, and it seems to work as I can see myself on the XLX reflector dashboard and it seems to change modules on demand, but I get no confirmation at my end. I am also hearing the traffic from the XLX reflector.
Here's the real kicker, I notice the DMR tile goes red intermittently and DMR Gateway seems to stop, then restart. I have run the log and it concurs, I have attached the log so you can see (drop box link).
https://www.dropbox.com/s/c0dtl7oaj5n11 ... m.png?dl=0
I have tried changing masters, disabling modes etc all with no change in behaviour.
If I switch back to straight DMR+ or BM it works perfectly
Any ideas?
Rasp Pi B3
STM 32 Board from Repeater Builder
BM MASTER: BM_Australia_5051
DMR+ MASTER: DMR+IPSC2=VKHOTSPOT
XLX MASTER: XLX505
Thanks in advance
de Pete VK2MPJ