New Overlay for DMRGateway - welcome your comments
Re: New Overlay for DMRGateway - welcome your comments
Thank you, and I should have said 8 digits long for BM.
Re: New Overlay for DMRGateway - welcome your comments
Added some new lines for the TGDYNRewrite options (reflector emulation).
Re: New Overlay for DMRGateway - welcome your comments
Just been trying the new settings... and for some reason, I think it breaks Parrot (9990) on BrandMeister... a transmission doesn't show up on the BM dashboard and nothing comes back. Setting it back to the old settings (before the rewrite recently) then makes it work again?
(must admit I'm not totally sure it's not something I'm doing!)
(must admit I'm not totally sure it's not something I'm doing!)
Code: Select all
TGRewrite0=2,9,2,9,1
TypeRewrite1=1,9990,1,9990
TypeRewrite2=2,9990,2,9990
SrcRewrite0=2,4000,2,9,1001
PassAllPC1=1
PassAllPC2=2
PassAllTG1=1
PassAllTG2=2
Re: New Overlay for DMRGateway - welcome your comments
Why doing things so complicated?
You don't need Network identifier for Talkgroups.
Beware of smal and easy to use codeplugs.
Have a look for an example, which is working well on a lot of duplex repeater and hotspots:
https://a23-wertheim.de/downloads/dmr/dmrgateway-2
You don't need Network identifier for Talkgroups.
Beware of smal and easy to use codeplugs.
Have a look for an example, which is working well on a lot of duplex repeater and hotspots:
https://a23-wertheim.de/downloads/dmr/dmrgateway-2
A few questions Re: New Overlay for DMRGateway - welcome your comments
Thank you so much for all your work on this Andy! A few quick (probably stupid) questions...
1) Should the Brandmeister server be changed to match my Pi-Star configuration settings? For example I'm set up to connect to BM_United_States_3103
2) the user fields, currently populated with 12345etc, do those need to be changed to our personal DMR IDs?
3) the fields marked "password", should those be changed to our respective passwords for the various networks? If so, with or without the quotation marks?
TL:DR - Is this DMRGateway overlay good to go or does it need tailored to the individual user? Thank you so much for your help in this matter!
73 de KK7BDG
1) Should the Brandmeister server be changed to match my Pi-Star configuration settings? For example I'm set up to connect to BM_United_States_3103
2) the user fields, currently populated with 12345etc, do those need to be changed to our personal DMR IDs?
3) the fields marked "password", should those be changed to our respective passwords for the various networks? If so, with or without the quotation marks?
TL:DR - Is this DMRGateway overlay good to go or does it need tailored to the individual user? Thank you so much for your help in this matter!
73 de KK7BDG
Re: New Overlay for DMRGateway - welcome your comments
This is very helpful. But how do I code the rewrites and other parameters for DMR2YSF, which doesn't work when I use DMR Gateway? I've been told by several users that I need to write DMR2YSF as a separate network when setting up GW with multiple networks. I had thought that this functionality was now built in. Also, does anyone have the coding for adding DMR-MARC to GW?
Re: New Overlay for DMRGateway - welcome your comments
Hi all My setup is a Simplex hotspot no timeslot 2
if I am in DMR gateway mode and I do a group call tg4000 I am not hearing the not linked if I turn on Digi moni I do hear not linked it is TS2 CO1
any ideas why i do not hear it if it off?
if I am in DMR gateway mode and I do a group call tg4000 I am not hearing the not linked if I turn on Digi moni I do hear not linked it is TS2 CO1
any ideas why i do not hear it if it off?
Code: Select all
[DMR Network 1]
Enabled=1
Address=3102.master.brandmeister.network
Port=62031
TGRewrite0=2,9,2,9,1
PCRewrite0=2,94000,2,4000,1001
TypeRewrite0=2,9990,2,9990
SrcRewrite0=2,4000,2,9,1001
PassAllPC0=1
PassAllTG0=1
PassAllPC1=2
PassAllTG1=2
Password=" is set has been removed"
Debug=0
Location=1
Id=is set has been removed
Name=BM_3102_United_States
Re: New Overlay for DMRGateway - welcome your comments
Ok I did not add that as that was how it was set when I made the new image
for the new gateway overlay
why switch it to 9?
and why use
to use brandMeister and tgif do I only need the code under network 4?
for the new gateway overlay
why switch it to 9?
and why use
Code: Select all
TGRewrite0=2,9,2,9,1
PCRewrite0=2,94000,2,4000,1001
TypeRewrite0=2,9990,2,9990
Re: New Overlay for DMRGateway - welcome your comments
Ok so I don’t know computers and all I want is BM and tgif on my hotspot. This is all very confusing. The code on the first part of this thread with the adjustments to the tgif talk group numbers will this allow me to be on tgif and BM? I understand it would allow for dmr + as well. I tried learning code at one point and realized I am not smart enough for that a few years ago. So if I deleted the original code and In put that one will I be good? It’s like Chinese person talking to me reading all this. I’ve been trying to understand this for weeks. Kinda looking for a copy and paste thing. Sorry for the bother. KE8TIG.
Re: New Overlay for DMRGateway - welcome your comments
I’m going to just copy and paste to add the the code per what I have found it will work as long as I expand the numbers for tgif. 73