The active TG row is missing on the Dashboard. This seems to have begun in the last few days. Running 4.1.1 and Dashboard date is 20200528. Just did an update and this is the latest avaiable without going to 4.1.2. How can I get the TG row back. The attached screenshot was taken when I was listening to a QSO of TG91.
Active TG row missing on Dashboard
Re: Active TG row missing on Dashboard
The attached screenshot shows the Time Slots (TS) and not Talk Groups (TG). It indicates you are either using or have set up a simplex board for which only TS2 will ever show up as enabled, regardless of which, if any, TG is active at any given time.
Re: Active TG row missing on Dashboard
See original post as active TG row is missing. I know the difference between TS and TG
The screenshot below is from my 20200505 Dashboard on the 4.1.1 Pi-Star version.
The screenshot below is from my 20200505 Dashboard on the 4.1.1 Pi-Star version.
Re: Active TG row missing on Dashboard
A decision was made to remove it, as it wasn't overly reliable, didn't always update in real-time and in some instances didn't show at all.
Sent from my SM-G935F using Tapatalk
Sent from my SM-G935F using Tapatalk
Andrew M1DNS.
Pi-star Admin Team.
Pi-star Admin Team.
Re: Active TG row missing on Dashboard
As Andrew says, removed because we had a lot of complaints about it.
In short many people didn't understand that the data comes from the log and not the connected DMR master, so it could only tell you about what just happened, and not what might happen next.
This lead to a lot of confusion, so much so that I removed it after the last complaints.
Re: Active TG row missing on Dashboard
OK Thanks