I know what Wires-X passthrough does when you are running YSF, but it is unclear if it does anything when selected while using DMR2YSF mode.
Any idea if this does anything?
Does Wires-X passthrough do anything on DMR2YSF mode?
Re: Does Wires-X passthrough do anything on DMR2YSF mode?
Not a guru , but I don't think so as in a DMR radio you need a channel set to use a talkgroup so Wires-X Passthrough has no meaning
In DMR if you use DMR2YSF and only DMR to YSF the TG numbers are the 5 digit room numbers for YSF or 100XXX for FCS rooms.
If you use the DMR Gateway with the Crossover to YSF the YSF room numbers are 70XXXXX and for the FCS rooms is 7100XXX. not to mention DMR has no wires-X button to pass through anyways.
In DMR if you use DMR2YSF and only DMR to YSF the TG numbers are the 5 digit room numbers for YSF or 100XXX for FCS rooms.
If you use the DMR Gateway with the Crossover to YSF the YSF room numbers are 70XXXXX and for the FCS rooms is 7100XXX. not to mention DMR has no wires-X button to pass through anyways.
I am no developer, guru, expert, nor do I claim to be or want to be. All advice I give is purely from experience and my efforts to help others.
W1KMC - Kevin M Carman
Bangor, ME
Jumbospot on a Pi0W
DMR 3123142 & 3123143
HHUS Trunk Ext 4329
W1KMC - Kevin M Carman
Bangor, ME
Jumbospot on a Pi0W
DMR 3123142 & 3123143
HHUS Trunk Ext 4329