Connection to DMR

[K3VL]

I have a new image of Pi-Star
Set up trying to use DMR
Have used DMR ID and password connecting to Brandmeister using BlueDV with DVMega to Blue Stack and also ZUMspot USB. No problem.

Set up same hardware with Pi-Star and my signal from handheld transmits to Pi-Star with BER of .1 to .3

Live log shows failure to connect to Brandmeister.
YSF works fine.

What am I missing??

Thanks K3VL

Screen shot of Config

ode:
DMR Mode
RF Hangtime:
20
Net Hangtime:
20
D-Star Mode:
DStar Mode
RF Hangtime:
20
Net Hangtime:
20
YSF Mode:
Y S F Mode
RF Hangtime:
20
Net Hangtime:
20
P25 Mode:
P 25 Mode
RF Hangtime:
20
Net Hangtime:
20
NXDN Mode:
NXDN Mode
RF Hangtime:
20
Net Hangtime:
20
YSF2DMR:
Y S F 2 DMR Mode
YSF2NXDN:
Y S F 2 NXDN Mode
YSF2P25:
Y S F 2 P 25 Mode
DMR2YSF:
DMR 2 Y S F Mode
Uses 7 prefix on DMRGateway
DMR2NXDN:
DMR 2 NXDN Mode
Uses 7 prefix on DMRGateway
POCSAG:
POCSAG Mode
POCSAG Paging Features
MMDVM Display Type:
None
Port:
/dev/ttyAMA0
Nextion Layout:
G4KLX


General Configuration
Setting Value
Hostname:
pi-star
Do not add suffixes such as .local
Node Callsign:
K3VL
CCS7/DMR ID:
3142302
Radio Frequency:
433.000.000
MHz
Latitude:
45.08
degrees (positive value for North, negative for South)
Longitude:
-79.05
degrees (positive value for East, negative for West)
Town:
15544 FN00kd
Country:
PA USA
URL:
https://www.qrz.com/db/K3VL
Auto Manual
Radio/Modem Type:
ZUMspot - USB Stick
Node Type: Private Public
APRS Host:
newengland.aprs2.net
System Time Zone:
America/New_York
Dashboard Language:
english_us


DMR Configuration
Setting Value
DMR Master:
BM_United_States_3102
Hotspot Security:
••••
BrandMeister Network:
BrandMeister Dashboards
Direct links to your BrandMeister Dashboards Repeater Information | Edit Repeater (BrandMeister Selfcare)
DMR ESSID: 3142302
None
DMR Color Code:
1
DMR EmbeddedLCOnly:
Enable DMR Embedded LC Only
DMR DumpTAData:
DMR Dump T-A Data

[K3VL]

I will try this again.

I have changed my password and done it while connected to Self Care several times.

I have made changes to my account, like adding a Static talkgroup in Brandmeister and it shows the change in Pi-Star.

I use all the same hardware with BlueDV and everything works.
Fusion works.

I have reimaged to 4.1.4

Live log shows I am not connecting to Brandmeister. I have seen some other posts here with the same problem that has not been solved.
I know it is a setting I am missing but what is it?


Live Logs
Starting logging, please wait...
E: 2021-02-16 01:48:18.201 DMR, Login to the master has failed, retrying network ...
M: 2021-02-16 01:48:18.201 DMR, Closing DMR Network
M: 2021-02-16 01:48:18.202 DMR, Opening DMR Network
E: 2021-02-16 01:48:28.290 DMR, Login to the master has failed, retrying network ...
M: 2021-02-16 01:48:28.290 DMR, Closing DMR Network
M: 2021-02-16 01:48:28.290 DMR, Opening DMR Network

Thanks K3VL