Has anyone had any success adding FreeDMR to Pistar when using DMR Gateway as DMR Master?
I have followed the FreeDmr instructions below, either addinding DMR Network 1 and renumbering the others , or adding DMR Network 4. Either way results in no DMR Networks showing in Dashboard, and all my DMR gateway settings get erased. So its not happy!
If using DMR Gateway
DMR GW changes
[DMR Network 1]
Enabled=1
Address=hotspot.uk.freedmr.link
Port=62031
#PC for Reflector Control (Dial-a-TG)
PCRewrite=2,80,2,80,4977
PCRewrite=2,5058,2,5058,4932
PCRewrite=2,9991,2,9991,225008
PCRewrite=2,235000,2,235000,1000
PCRewrite=2,236000,2,236000,764000
PassAllTG=1
PassAllTG=2
Password=passw0rd
Debug=0
Id=xxxxxx Set your ID Number
Options= # See this link if you wish to use DMR Options : Static Talk Groups
Location=0
FreeDMR
Re: FreeDMR
Make sure you don't include any of the comment lines (IE Any line that starts with a #) and remove any other comments within lines. Pi-Star does not parse them correctly and it ends up corrupting the entire file.
So, specifically from the example you posted, you would remove this line:
#PC for Reflector Control (Dial-a-TG)
and change this line:
Options= # See this link if you wish to use DMR Options : Static Talk Groups
to
Options=
73,
Joe, WB3IHY
So, specifically from the example you posted, you would remove this line:
#PC for Reflector Control (Dial-a-TG)
and change this line:
Options= # See this link if you wish to use DMR Options : Static Talk Groups
to
Options=
73,
Joe, WB3IHY
Re: FreeDMR
Ok Thanks, Ill give that a go and report back
Re: FreeDMR
That did the trick! Also I needed to add a name= entry for Freedmr
Thanks for the suggestions
Thanks for the suggestions
Re: FreeDMR
Questions..
How to config BM and FreeDMR to be simultaniously on simplex an/or dual HS ?
How to do with BM, DMR+ and FreeDMR?
Thanks.
How to config BM and FreeDMR to be simultaniously on simplex an/or dual HS ?
How to do with BM, DMR+ and FreeDMR?
Thanks.
73'Rafael.
EA3BIL
JN11an
EA3BIL
JN11an
Re: FreeDMR
Goto W1MSG youtube channel.
Graig is the "official video channel" for pistar.
Youll find a vid he did showing you how to configure for BM and TGIF.
The same process can be applied for adding more networks if you choose by changing server addresses and the tg rewrite entries.
Sent via smoke signals from my SM-G935F M1DNS (Admin)
Graig is the "official video channel" for pistar.
Youll find a vid he did showing you how to configure for BM and TGIF.
The same process can be applied for adding more networks if you choose by changing server addresses and the tg rewrite entries.
Sent via smoke signals from my SM-G935F M1DNS (Admin)
Andrew M1DNS.
Pi-star Admin Team.
Pi-star Admin Team.