HELP! DMR does not work anymore after update to 4.1.5

Help with DMR issues
Post Reply
HJ4MOR
Posts: 4
Joined: Fri Nov 09, 2018 12:57 am

HELP! DMR does not work anymore after update to 4.1.5

Post by HJ4MOR »

Hello everyone, recently I have updated my JumboSpot to the latest firmware from pi-star, any who, now, I cannot receive anything, and also the dmr network icon shows red after a couple of minutes, also on the top part of the admin dashboard the icon from the dmr gateway is now red all the time, I have no idea what's going on, before the update everything worked as expected, now I have no clue.

Any help would be apreciated. Cheers.

HK4MOR
HJ4MOR
Posts: 4
Joined: Fri Nov 09, 2018 12:57 am

Re: HELP! DMR does not work anymore after update to 4.1.5

Post by HJ4MOR »

KE7FNS wrote: Tue Aug 17, 2021 7:38 pm
HJ4MOR wrote: Tue Aug 17, 2021 5:57 pm I have no idea what's going on
I would just reimage the SD card with the latest image and start over from scratch. I have a suspicion that the DMRGateway configuration is missing essential parts, causing it to fail.

If you have a backup you can try to restore that, but if your backup is also missing parts then its also not going to work, which is why I suggest just re-entering the information.

Thanks for the suggestion, I will do so today and see what happens. Cheers.
N6WY
Posts: 4
Joined: Sun Apr 15, 2018 5:54 pm

Re: HELP! DMR does not work anymore after update to 4.1.5

Post by N6WY »

I also have this problem. Did you find a solution?
N6WY
Posts: 4
Joined: Sun Apr 15, 2018 5:54 pm

Re: HELP! DMR does not work anymore after update to 4.1.5

Post by N6WY »

I found my problem. Configuration page setting error. For my hotspot (RFinder HCP-1) I need to have the MMDVM Display Type Port set to Modem not tty.
Post Reply