Pi-Star bluetooth connection

All IP networking related issues
Post Reply
KC9DK
Posts: 5
Joined: Thu Jan 17, 2019 2:06 am

Pi-Star bluetooth connection

Post by KC9DK » Wed Jan 30, 2019 11:44 pm

Is is possible to tether the pi-star to an iphone via bluetooth connection? My wifi hotspot from the phone is very unreliable (phone issue, not pi-star). Most times when I want to connect I have to restart my phone to make its broadcast its SSID. Is there a way to tether via Iphone's built in bluetooth feature for tethering? I'm using the MMDVM board with a Pi Zero. Any help would be appreciated.

MW0MWZ
Site Admin
Posts: 623
Joined: Wed Apr 04, 2018 9:15 pm
Location: Wales, UK
Contact:

Re: Pi-Star bluetooth connection

Post by MW0MWZ » Thu Jan 31, 2019 8:20 pm

Not currently, we have to move the on board bluetooth to the low speed UART, you can use the cable however.
Andy

73 de MW0MWZ
http://pistar.uk

KC9DK
Posts: 5
Joined: Thu Jan 17, 2019 2:06 am

Re: Pi-Star bluetooth connection

Post by KC9DK » Sun Feb 03, 2019 10:49 pm

Thank you for the reply. I figured this was a very isolated issue that I was having. I'm not having a whole lot of luck hooking up the cable. I've looked through all the setup and am not finding any settings that need changed to be able to tether via iphone lightning cable to USB. I deleted the wireless configuration, hooked up the wire to the phone for bootup and powered on. Each time i still see the the AP start up and no network is connected. I really get the feeling this is a phone issue, but just wanted to check to make sure there isn't something I needed to set up.

Post Reply