Hello all,
I have tried and tried to connect to my Pi-Star hotspot through my Linux Mint PC using the http://pi-star.local/admin/
The devices are ll connected to the same network in my home.
I can connect through my Windows 10 Laptop, but the Linux Mint 20 PC is my main PC, I really want to see the dash board on it.
I have tried with firewall enabled and disabled in Linux Mint 20.
Is there an IP address that can be used to access the Dash Board? How do I find the correct address?
Any help would be greatly appreciated.
Thanks
Walter W9KJO
Connecting to Pi-Star using Linux Mint 20
Re: Connecting to Pi-Star using Linux Mint 20
Couple things to try is drop .locah e.g http://pi-star/
If you can sewe the dashboard on another computer then go to the Configuration -> pi-star / raspberry (if asked) -> scroll to bottom. If you are on Wifi with this hotspot the IP will show up in the box -- If you are wired then you need to go to the computer that has the dashboard displayed and: configuration->Expert->SSH access (again pi-star / raspberry) and type ifconfig -- look for Lan0 and find the IP address.
Good Luck
If you can sewe the dashboard on another computer then go to the Configuration -> pi-star / raspberry (if asked) -> scroll to bottom. If you are on Wifi with this hotspot the IP will show up in the box -- If you are wired then you need to go to the computer that has the dashboard displayed and: configuration->Expert->SSH access (again pi-star / raspberry) and type ifconfig -- look for Lan0 and find the IP address.
Good Luck
I am no developer, guru, expert, nor do I claim to be or want to be. All advice I give is purely from experience and my efforts to help others.
W1KMC - Kevin M Carman
Bangor, ME
Jumbospot on a Pi0W
DMR 3123142 & 3123143
HHUS Trunk Ext 4329
W1KMC - Kevin M Carman
Bangor, ME
Jumbospot on a Pi0W
DMR 3123142 & 3123143
HHUS Trunk Ext 4329