RemoteGateway Option for YSF/DMR/Dstar

Post Reply
AE5ME
Posts: 2
Joined: Sat Apr 04, 2020 10:02 pm

RemoteGateway Option for YSF/DMR/Dstar

Post by AE5ME » Thu Apr 09, 2020 5:38 pm

I currently have a repeater running YSF/DMR/Dstar modes using a MMDVM repeater board. There is no internet service at the repeater site.

If I put another MMDVM repeater board with link radio at a location with internet service and set the expert settings RemoteGateway = 1 for all three modes, will the link radio act as a user radio and pass traffic back and forth to the various reflectors? I assume I will set the callsign on the link system to be the same as the repeater.

Thanks in advance!

M1DNS
Posts: 727
Joined: Thu Apr 05, 2018 5:30 am

Re: RemoteGateway Option for YSF/DMR/Dstar

Post by M1DNS » Thu Apr 09, 2020 8:21 pm

It will for YSF and DSTAR
It will not for DMR.

Yep same callsign.

Sent from my SM-G935F using Tapatalk


Andrew M1DNS.
Pi-star Admin Team.

User avatar
MW0MWZ
Site Admin
Posts: 1067
Joined: Wed Apr 04, 2018 9:15 pm
Location: Wales, UK
Contact:

Re: RemoteGateway Option for YSF/DMR/Dstar

Post by MW0MWZ » Thu May 28, 2020 5:43 pm

M1DNS wrote:
Thu Apr 09, 2020 8:21 pm
It will for YSF and DSTAR
It will not for DMR.

Yep same callsign.

Sent from my SM-G935F using Tapatalk
Almost - you can run DMRGateway on the 2nd unit, that would fix the DMR one too I think..
Andy

73 de MW0MWZ
http://pistar.uk

M1DNS
Posts: 727
Joined: Thu Apr 05, 2018 5:30 am

Re: RemoteGateway Option for YSF/DMR/Dstar

Post by M1DNS » Thu May 28, 2020 9:43 pm

As a remote rf gateway ?? Feeding a repeater.

Sent from my SM-G935F using Tapatalk

Andrew M1DNS.
Pi-star Admin Team.

Post Reply