Options in DMR Gateway Repeater.

Post Reply
F5VMR
Posts: 41
Joined: Thu Apr 12, 2018 6:08 am

Options in DMR Gateway Repeater.

Post by F5VMR »

I am preparing a repeater to be used on two (+) networks using the Gateway options.
I have two questions.
1. If the repeater becomes active on one network, then for the time being the other network is not available on either slot? is this correct? To have BrandMeister on Slot 2 and IPSC2 on slot 1 at one and the same time in other words.
2. So far I have succeeded in achieving the two networks, BrandMeister is 100% operational, but I do not see the Talk-Groups appearing on Time Slot 2 on the IPSC2 server. This is the configuration.
[DMR Network 2]
Enabled=1
Address=51.141.9.99
Port=55555
TGRewrite0=1,8001,1,1,701
TGRewrite1=2,8800,2,800,101
Password="PASSWORD"
Debug=0
Id=208687
Name=DMR+_IPSC2-Scotland
Options="StartRef=4450;RelinkTime=60;UserLink=1;TS1_1=235;TS1_2=80;TS1_3=81;TS1_4=1;TS1_5=13;TS1_6=2;TS2_1=810;TS2_2=820;TS2_3=860;"
TIA
Post Reply