I am preparing a repeater to be used on two (+) networks using the Gateway options.
I have two questions.
1. If the repeater becomes active on one network, then for the time being the other network is not available on either slot? is this correct? To have BrandMeister on Slot 2 and IPSC2 on slot 1 at one and the same time in other words.
2. So far I have succeeded in achieving the two networks, BrandMeister is 100% operational, but I do not see the Talk-Groups appearing on Time Slot 2 on the IPSC2 server. This is the configuration.
[DMR Network 2]
Enabled=1
Address=51.141.9.99
Port=55555
TGRewrite0=1,8001,1,1,701
TGRewrite1=2,8800,2,800,101
Password="PASSWORD"
Debug=0
Id=208687
Name=DMR+_IPSC2-Scotland
Options="StartRef=4450;RelinkTime=60;UserLink=1;TS1_1=235;TS1_2=80;TS1_3=81;TS1_4=1;TS1_5=13;TS1_6=2;TS2_1=810;TS2_2=820;TS2_3=860;"
TIA
Options in DMR Gateway Repeater.
Jump to
- Pi-Star Information
- ↳ Announcements
- ↳ Feature Requests
- ↳ FAQ
- Software Support
- ↳ Pi-Star General Support
- ↳ WiFi Setup
- ↳ IP Networking
- ↳ D-Star Specific Support
- ↳ DMR Specific Support
- ↳ YSF Specific Support
- ↳ P25 Specific Support
- ↳ NXDN Specific Support
- ↳ POCSAG Specific Support
- Hardware Support
- ↳ Raspberry Pi Foundation Hardware
- ↳ Friendly Arm Nano Pi Neo / Neo Air
- ↳ Hardkernel Odroid XU3 / XU4
- ↳ Orange Pi Zero
- ↳ Nextion Screens
- ↳ OLED Screens
- ↳ ZUMSpot (Hat / Libre / USB)
- ↳ MMDVM_HS Hat(s)
- ↳ DV-Mega Hat(s)
- ↳ DV-Mega GMSK Arduino
- ↳ DVAP Dongle
- ↳ DVR-PTR V1 V2 V3
- ↳ Other MMDVM Modem Boards
- ↳ Other All-in-one Boards with included RF
- ↳ Radio Equipment
- Repeater Keepers
- ↳ Software Support
- ↳ Hardware Support
- ↳ Everything Else
- Tutorials
- ↳ W1MSG Video Tutorials
- ↳ User Submitted Video Tutorials
- ↳ Tips and Tricks
- General Conversation
- ↳ Share your stuff
- ↳ I'm new here
- ↳ CQ CQ CQ
- ↳ I need to vent
- ↳ The Bar