Page 1 of 1

RemoteGateway Option for YSF/DMR/Dstar

Posted: Thu Apr 09, 2020 5:38 pm
by AE5ME
I currently have a repeater running YSF/DMR/Dstar modes using a MMDVM repeater board. There is no internet service at the repeater site.

If I put another MMDVM repeater board with link radio at a location with internet service and set the expert settings RemoteGateway = 1 for all three modes, will the link radio act as a user radio and pass traffic back and forth to the various reflectors? I assume I will set the callsign on the link system to be the same as the repeater.

Thanks in advance!

Re: RemoteGateway Option for YSF/DMR/Dstar

Posted: Thu Apr 09, 2020 8:21 pm
by M1DNS
It will for YSF and DSTAR
It will not for DMR.

Yep same callsign.

Sent from my SM-G935F using Tapatalk



Re: RemoteGateway Option for YSF/DMR/Dstar

Posted: Thu May 28, 2020 5:43 pm
by MW0MWZ
M1DNS wrote: Thu Apr 09, 2020 8:21 pm It will for YSF and DSTAR
It will not for DMR.

Yep same callsign.

Sent from my SM-G935F using Tapatalk
Almost - you can run DMRGateway on the 2nd unit, that would fix the DMR one too I think..

Re: RemoteGateway Option for YSF/DMR/Dstar

Posted: Thu May 28, 2020 9:43 pm
by M1DNS
As a remote rf gateway ?? Feeding a repeater.

Sent from my SM-G935F using Tapatalk