FM

G0FHM
Posts: 33
Joined: Mon May 14, 2018 8:47 pm

Re: FM

Post by G0FHM »

All fixed, found the code!

And it works!

http://dvswitch.org/files/HAM/MMDVM/Ver ... _f4_FM.hex

Thanks for your help!

James
KE7FNS
Pi-Star Team
Posts: 1794
Joined: Wed Apr 17, 2019 11:11 pm

Re: FM

Post by KE7FNS »

G0FHM wrote: Sun Sep 20, 2020 8:01 am Now I just need to find the code!

The only code that is on BI7JTA's site is the current code, which appears to have been stopped at that version. I've tried others, but the modem hasn't liked it, and i've had to revert to the current code.

Will have to keep digging!
Github tells you where the code was forked from.

Look at the top right of VR2VYE's MMDVM repo or you can go to the forked page:

https://github.com/VR2VYE/MMDVM/network/members


That file isn't current, its 3 months old.

You should be downloading the source, configuring and building the firmware and then flashing that if you want the correct and most up to date code.

It has options enabled that were not enabled in the code you had.
#define USE_COS_AS_LOCKOUT
#define MODE_LEDS
#define SEND_RSSI_DATA
#define SERIAL_REPEATER
#define USE_ALTERNATE_FM_LEDS

And this is disabled where it was enabled in the code you had.
#define ARDUINO_DUE_ZUM_V10


It may work, but it isn't configured the same as what you had.
If someones previous actions are any indication of their future actions, then I predict the deletion and removal of access will happen at any moment. 7-11-2020.

"07/13/20 This Website Has Been Taken Down" ... again :lol:
Post Reply