Page 1 of 1

No Audio passing, DMR2YSF DMRGateway

Posted: Thu Jul 08, 2021 4:04 am
by 9Y4C
Hello Everyone and Greetings from Trinidad and Tobago.
I am running Pi-Star 4.1.5 on my MMDVM Hotspot, it is configured for cross-mode DMR2YSF using DMRGateway, My radio is programmed with 70 before the reflector number e.g. 7081520, so when the radio is keyed the hotspot connects to the respective reflector.
Lately I have noticed that when i Key up the radio it does not connect to the reflector, so I set it to connect to a reflector on start up of which it does, but when I transmit on the reflector no audio is passed, I'm not heard, but all traffic passing on the reflector is heard, I monitored my transmission on the Pi-Star Dashboard which shows that the radio is transmitting.
Seems like the hotspot and the reflector is only communicating in one direction.
Does anyone else have this problem, or has something changed where the configuration is concerned that I missed?
Please Help!
De 9Y4C Dexter
Best 73

Re: No Audio passing, DMR2YSF DMRGateway

Posted: Fri Jul 09, 2021 5:53 pm
by w8dnz
I'm having similar issues.

Admin Dashboard shows YSFGateway and YSFParrot active. DMR2YSF Network is active, DMRMaster is DMR2YSF Crossover, and YSF Network is ZZ YSF Parrot. I get no response from YSF Parrot (TG 7099999). Curiously the pi-star log says YSF is disabled. Dashboard shows expected local RF activity with no network reply.

This is with Bridgecom Systems Skybridge Plus running Pi-Star 4.1.5, and an AnyTone D878Plus with latest firmware.

Re: No Audio passing, DMR2YSF DMRGateway

Posted: Mon Jul 12, 2021 6:35 am
by 9Y4C
9Y4C wrote: Thu Jul 08, 2021 4:04 am Hello Everyone and Greetings from Trinidad and Tobago.
I am running Pi-Star 4.1.5 on my MMDVM Hotspot, it is configured for cross-mode DMR2YSF using DMRGateway, My radio is programmed with 70 before the reflector number e.g. 7081520, so when the radio is keyed the hotspot connects to the respective reflector.
Lately I have noticed that when i Key up the radio it does not connect to the reflector, so I set it to connect to a reflector on start up of which it does, but when I transmit on the reflector no audio is passed, I'm not heard, but all traffic passing on the reflector is heard, I monitored my transmission on the Pi-Star Dashboard which shows that the radio is transmitting.
Seems like the hotspot and the reflector is only communicating in one direction.
Does anyone else have this problem, or has something changed where the configuration is concerned that I missed?
Please Help!
De 9Y4C Dexter
Best 73
The revert solved this problem!