iCOM 2820 AND ZUMSPOT

Post Reply
GM0VWZ
Posts: 11
Joined: Fri Jul 20, 2018 7:44 pm

iCOM 2820 AND ZUMSPOT

Post by GM0VWZ »

Hi
To all out there looking for some help I asked this question a long time ago, but this is me just getting organized,

Is there anyone out there that can tell me how to set up the memories on an Icom 2820 to work with a ZumSpot letting me change reflectors from the radio

Any help would be very much appreciated

Sam

GM0VWZ
M1DNS
Pi-Star Team
Posts: 1388
Joined: Thu Apr 05, 2018 5:30 am

Re: iCOM 2820 AND ZUMSPOT

Post by M1DNS »

Use the UR memories. Rather than programming separate radio memories. It's a lot easier than having multiple memories that will essentially have the same frequency, offset, rpt1 and rpt2 and just the UR field will be different. You only really need one radio memory programmed with freq. offset, rpt1 & 2 everything else will be done via UR commands.

Sent from my SM-G935F using Tapatalk

Andrew M1DNS.
Pi-star Admin Team.
GM0VWZ
Posts: 11
Joined: Fri Jul 20, 2018 7:44 pm

Re: iCOM 2820 AND ZUMSPOT

Post by GM0VWZ »

Hi Andrew

Thanks very much for your information on the Icom 2820 and the
ZumSpot I will set this up shortly.

Many Thanks Again

Sam
GM0VWZ
Post Reply