how to setup pi-star to automatically reconnect to the YSF Reflector if looses connection

Help with YSF / Fusion issues
Post Reply
kp4msr
Posts: 3
Joined: Fri Oct 25, 2019 1:52 am

how to setup pi-star to automatically reconnect to the YSF Reflector if looses connection

Post by kp4msr » Thu May 21, 2020 5:18 pm

Hello, how can i configure pi-star to reconnect automatically to a YSF reflector is connection is loosed.

I tried using export mode setting the reflector1 and reconnect parameters as shown in attachmetn but this dont works.
Attachments
ysf.JPG
ysf.JPG (122.21 KiB) Viewed 200 times

n9mxq
Posts: 207
Joined: Sun Apr 29, 2018 12:12 pm

Re: how to setup pi-star to automatically reconnect to the YSF Reflector if looses connection

Post by n9mxq » Thu May 21, 2020 5:51 pm

Mine has Reconnect1 set to 0, and has always connected..
Gene in Belvidere IL
Please don't email me with questions.
That's what these forums are for.
There's much more brainpower collected here
than I have alone.

kp4msr
Posts: 3
Joined: Fri Oct 25, 2019 1:52 am

Re: how to setup pi-star to automatically reconnect to the YSF Reflector if looses connection

Post by kp4msr » Thu May 21, 2020 6:24 pm

i tried that but not working, its still disconnected and i need to manually reboot the jumbo spot to reconnect.
not-linked.JPG
not-linked.JPG (73.76 KiB) Viewed 188 times

M1DNS
Posts: 727
Joined: Thu Apr 05, 2018 5:30 am

Re: how to setup pi-star to automatically reconnect to the YSF Reflector if looses connection

Post by M1DNS » Thu May 21, 2020 8:46 pm

Why are you editing the ircddbgateway panel? That's associated with the dstar mode. For YSF you should be making changes in the YSF gateway. (YSF GW)

admin/expert/edit_ysfgateway.php

Sent from my SM-G935F using Tapatalk


Andrew M1DNS.
Pi-star Admin Team.

kp4msr
Posts: 3
Joined: Fri Oct 25, 2019 1:52 am

Re: how to setup pi-star to automatically reconnect to the YSF Reflector if looses connection

Post by kp4msr » Thu May 21, 2020 11:50 pm

YSF GW dont have any parameter named "reconnect".

Do you know what parameter need to modify?

its there a wiki page or something where we can check out the parameters purposes ?

User avatar
VK7HSE
Posts: 192
Joined: Sun Apr 15, 2018 6:35 pm
Contact:

Re: how to setup pi-star to automatically reconnect to the YSF Reflector if looses connection

Post by VK7HSE » Fri May 22, 2020 6:47 am

Scroll down towards the bottom of the ysfgw config and look for the network and change revert from 0 to 1 and ensure that you have the target in the start up (most likely already is)

Sent from my Pixel 4 XL using Tapatalk

Image

SP2ONG
Posts: 39
Joined: Fri Aug 10, 2018 5:05 am

Re: how to setup pi-star to automatically reconnect to the YSF Reflector if looses connection

Post by SP2ONG » Fri May 22, 2020 1:54 pm

I suppose that problem exists for all XXXgateway programs. I have the same problem with NXDN and P25 reflector (NXDNGateway and P25Gateway)

https://github.com/g4klx/NXDNClients/issues/91

Post Reply