YSF not passing traffic on pistar

[WX5OU]

When using pistar on YSF Im and unable to pass Traffic RX or TX.. Tried Alabama Link and Oklahoma Link



Anyone else having this issue?

[W7DTH]

I have noticed that when I pick a YSF room from the drop-down menu in config and click apply...when I return back to the admin dashboard it says not linked in the YSF Network box. Keying up the radio doesn't make a connection either...it isn't until I go into Wires-X mode on my FT-70 and input the room number will it connect. On the other hand I can pick any FCS room from the drop-down menu in config and it connects when I return to the dashboard.

[MW0MWZ]

I have noticed that when I pick a YSF room from the drop-down menu in config and click apply...when I return back to the admin dashboard it says not linked in the YSF Network box. Keying up the radio doesn't make a connection either...it isn't until I go into Wires-X mode on my FT-70 and input the room number will it connect. On the other hand I can pick any FCS room from the drop-down menu in config and it connects when I return to the dashboard.

I've tested this and cannot replicate it - does it happen with a specific room ?

[WX5OU]

Every room I go to.. Cannot hear or transmit.. Alabama Link America Link and several others. they all show NOT LINKED in the admin page.. I am able to use my Openspots with no issues

[MW0MWZ]

Are you driving the change from the radio or the dashboard?

[AF5XC]

I am experiencing the same issue. I know of two other people who are experiencing this. I set the modem in configuration to Ysf then chose any YSF reflector from the drop down. When I go back to the dashboard YSF is red and the link status is not linked. It started about 36 hours ago.

[WX5OU]

Are you driving the change from the radio or the dashboard?

Both radio and Software..

[MW0MWZ]

Are you driving the change from the radio or the dashboard?

Both radio and Software..

I'm going to need some logs for this - I just cant replicate it.

[MW0MWZ]

I am experiencing the same issue. I know of two other people who are experiencing this. I set the modem in configuration to Ysf then chose any YSF reflector from the drop down. When I go back to the dashboard YSF is red and the link status is not linked. It started about 36 hours ago.

If YSF is red, MMDVMHost is not starting - it's not a surprise that you cant talk to anyone, can we get some logs please.

[WX5OU]

Are you driving the change from the radio or the dashboard?

Both radio and Software..

I'm going to need some logs for this - I just cant replicate it.

If you can since you are unable to duplicate.. can you try to link to Us Oklahomalink and transmit and see if we can hear you?.. we are unable to get on at all on that link or alabama link.. several folks in are area are having this issue with pistar