Automatic unlink from YSF network

Help with YSF / Fusion issues
Post Reply
LU1BJW
Posts: 10
Joined: Tue May 28, 2019 10:59 pm

Automatic unlink from YSF network

Post by LU1BJW » Wed Jun 05, 2019 12:29 pm

When someone by ptt linked the repeater to FSC00... and the dashboard field YSF Network shows "Linked to FSC...", the system by itself do not unlink the repeater after the 10 minutes time out we setted up in the software.
Looking at the forum I found 2 options:
1- Yaesu commands from a YSF rig (but we depend of good behavior of all repeater users).
2-Rebooting.

I'm afraid both options are not enough for very well developed system, may be there should be something we missed in the configuration and there is something more to set up after of time out timer.

Looking forward to comments, thanks

MW0MWZ
Site Admin
Posts: 875
Joined: Wed Apr 04, 2018 9:15 pm
Location: Wales, UK
Contact:

Re: Automatic unlink from YSF network

Post by MW0MWZ » Wed Jun 05, 2019 7:45 pm

What settings did you add ?
Andy

73 de MW0MWZ
http://pistar.uk

LU1BJW
Posts: 10
Joined: Tue May 28, 2019 10:59 pm

Re: Automatic unlink from YSF network

Post by LU1BJW » Thu Jun 06, 2019 1:35 pm

Hi Andy,
Screenshot of repeater dashboard attached
Image 2019-06-06 at 10.05.12.jpeg
dashboard screenshot
Image 2019-06-06 at 10.05.12.jpeg (103.85 KiB) Viewed 241 times

f1rmb
Posts: 2
Joined: Thu Feb 21, 2019 12:12 pm

Re: Automatic unlink from YSF network

Post by f1rmb » Fri Jun 07, 2019 6:09 am

Hi
I think Andy meant in YSFGateway configuration file (use expert's editor), about Network::InactivityTimeout and Network::Revert values I guess.

Cheers.
---
Daniel

LU1BJW wrote:
Thu Jun 06, 2019 1:35 pm
Hi Andy,
Screenshot of repeater dashboard attached
Image 2019-06-06 at 10.05.12.jpeg

LU1BJW
Posts: 10
Joined: Tue May 28, 2019 10:59 pm

Re: Automatic unlink from YSF network

Post by LU1BJW » Fri Jun 07, 2019 2:44 pm

Merci Daniel.

Andy please find attached the confirgutarion YSFGateway screenshot.
Looking forward to your comments.
Thanks
Attachments
Image 2019-06-07 at 10.34.45.jpeg
Image 2019-06-07 at 10.34.45.jpeg (107.29 KiB) Viewed 211 times

User avatar
VK7HSE
Posts: 153
Joined: Sun Apr 15, 2018 6:35 pm
Contact:

Re: Automatic unlink from YSF network

Post by VK7HSE » Fri Jun 07, 2019 2:54 pm

In your second picture, right at the bottom where it says Network. Set inactivity time out to a value in minutes and then set revert to 1 and then it will revert back to your default startup room.

Sent from my Pixel 2 XL using Tapatalk


LU1BJW
Posts: 10
Joined: Tue May 28, 2019 10:59 pm

Re: Automatic unlink from YSF network

Post by LU1BJW » Thu Jun 13, 2019 10:27 pm

Thanks Scott.
We testing your propossal.
73

Post Reply