Hi All
Currently just activated fusion on our repeater and have only had the FTM-100 for a few days. Now on the fcs001.xreflector.net/# website I always see the Mycall as the repeater and not my own call sign. Is this a pi-star setup issues or a wrongly programmed radio?
If I look however at the repeaters pi-star dashboard, gateway activity its showing my callsign as it should.
Any help would be much apricated.
Regards
Paul
G7KBR
FCS001 showing Mycall as the repeaters call sign?
Re: FCS001 showing Mycall as the repeaters call sign?
Just been testing this, and found the same as you, its not a config problem, I expect it will turn out to be an issue with the way FCS is built into the YSFGateway.g7kbr wrote: ↑Tue Jul 30, 2019 5:16 pm Hi All
Currently just activated fusion on our repeater and have only had the FTM-100 for a few days. Now on the fcs001.xreflector.net/# website I always see the Mycall as the repeater and not my own call sign. Is this a pi-star setup issues or a wrongly programmed radio?
If I look however at the repeaters pi-star dashboard, gateway activity its showing my callsign as it should.
Any help would be much apricated.
Regards
Paul
G7KBR
I'll go looking and see if I can find any obvious way to fix that, and if I can't, I'll let Jonathan know about it.
Re: FCS001 showing Mycall as the repeaters call sign?
After more testing, the callsign is passed correctly across the FCS network, so radio > Pi-Star > FCS network > Pi-Star > Radio, the callsign makes it radio to radio without issue, but the FCS dashboard only reports the repeater callsign. I don't believe that this is a Pi-Star issue, its the way the FCS dashboard is parsing the data - at least that's my take on it at the moment.MW0MWZ wrote: ↑Wed Jul 31, 2019 2:42 pmJust been testing this, and found the same as you, its not a config problem, I expect it will turn out to be an issue with the way FCS is built into the YSFGateway.g7kbr wrote: ↑Tue Jul 30, 2019 5:16 pm Hi All
Currently just activated fusion on our repeater and have only had the FTM-100 for a few days. Now on the fcs001.xreflector.net/# website I always see the Mycall as the repeater and not my own call sign. Is this a pi-star setup issues or a wrongly programmed radio?
If I look however at the repeaters pi-star dashboard, gateway activity its showing my callsign as it should.
Any help would be much apricated.
Regards
Paul
G7KBR
I'll go looking and see if I can find any obvious way to fix that, and if I can't, I'll let Jonathan know about it.