Hi guys,
I'm an italian ham, iz4bkk, I bought a Yaesu FT3D and I can connect a local radio repeater, and I can change rooms with the "X" button, all works fine.
I have also a ZoomSpot with Pi-star installed, that I have used with the DMR Radio (Anyton 878), and now I would like to use the hotspot with the FT3D.
The YSF is the only mode turned "ON" on the Pi-Star, I have selected the room where I woul like to be connected (Room Italy), and I can receive on the radio the QSO (simple mode selected), but when I try to transmit the hotspot can't do anything. Even if I push the "X" button.
Someone can help me please?
Thanks in advance,
best 73 de IZ4BKK Andrea
rx ok, but no tx (Zumspot with Pi-Star)
rx ok, but no tx (Zumspot with Pi-Star)
Last edited by iz4bkk on Wed Mar 04, 2020 4:57 pm, edited 1 time in total.
Re: rx ok, but no tx (Zoomspot with Pi-Star)
Open the live logs link on the expert page.
What's reported when you key up?
Sent from my SM-G935F using Tapatalk
What's reported when you key up?
Sent from my SM-G935F using Tapatalk
Andrew M1DNS.
Pi-star Admin Team.
Pi-star Admin Team.
Re: rx ok, but no tx (Zoomspot with Pi-Star)
In the live logs when I push the PTT notingh appears.
When others stations talks, in the live logs is "recorded" the transmission, but nothing when I push the PTT...
Thanks,
iz4bkk
When others stations talks, in the live logs is "recorded" the transmission, but nothing when I push the PTT...
Thanks,
iz4bkk